12
ATTACHING THE TRIMMING MECHANISM
(1) Main pipe
(2) Trimming mechanism
(3) Screw hole
(4) Screw
(5) Fastening bolt
1. Remave the screw screwed inta the end al the trimming mechanism.
2. lnsert the end af the trimming mechanism inta the main pipe.
3. Line up the hale an the end af the trimming mechanism into which the
screw is to be inserted with the hale an the main pipe, and screw the screw
firmly in.
4. Using a wrench, screw in the bolt provided to lix the trimming mechanism
into place.
BALANCE UNIT
1. Put on strap and attach unit to strap.
2. Depending an the working posture, slide clamp up or down until unit
balances and the strap fits your body.
ATTACHING THE PRUNING MECHANISM
(1) Main pipe
(2) Transmission
(3) Screw hole
(4) Fastening bolt
(5) Bolt
1. Remave the cap an the end af the main pipe.
2. Remave the screw screwed into the end ol the transmissian.
3. lnsert the end of the gear case into the main pipe.
4. Line up the hale on the end al the transmissian into which the screw is to
be inserted with the hale on the main pipe, and screw the screw firmly in.
5. Using a wrench, screw in the bolt provided to lix the mechanism into
place.
A standard package contains the items as shown below.
(1) Guide bar
(2) Saw chain
(3) Transmission
(4) Sprocket
(5) Chain tension adjust screw
(6) Nut
(7) Chain tensioner nut
