Daewoo DLT - 42G1LTBD, Руководство по обслуживанию

Страница: 10 / 55

-10-
4. SERVICE MODE
Using the Service Remote controller, you can enter service mode directly.
SERVICE REMOCON : R-34SVC(S/N:48B3034SVC)
4-1.EEPROM initial DATA
Key
S1
S2
S3
S4
Name
Heat Run Mode
Volume Test
EDID write
S5 PANEL TEST
S6
S7
S8
PICTURE TEST
Default
0
0
0
300
290
290
Don’t use
Don’t use
CUT OFF R
CUT OFF G
CUT OFF B
DRIVE R
DRIVE G
DRIVE B
Auto Y Clamp
Auto Y Gain
Adjustment
fix
fix
fix
fix
fix
fix
fix
fix
White balance &
EEPROM Erase
Gumi channel map write
Volume 0->32->63->L->R
1.Connect jumper(I2C)
2.Press "S4" key and then, TV set display "EDID WRITE
OK" upper left of screen.
3.If EDID writing is fail, TV set display "EDID Write Error"
upper left of screen.
4.After EDID write, remove jumper
1.Press the "S8" key.
2.Press the "OK" key of user remocon. And then TV set
display " EEPROM CLEARED" upper left of screen.
3.When you turn off/on AC POWER. EEPROM data will
be cleared.
PATTERN: BLACK -> WHITE -> RED -> GREEN -> BLUE
DEMPOL CHANNEL MAP WRITE
PATTERN: BRIGHT MIN -> CEN-> MAX ->
CONTRAST MIN -> CEN -> MAX->
COLOR MIN -> CEN -> MAX
Operating Method
EEPROM Erase
operating method
Details
Default
Function
Adjustment