4
PARTS LIST
1. lid opening
2. lid
3. jar
4. rubber gasket
5. cutting unit
6. safety switch for lid
7. safety switch for jar
8. the motor base
9. Speed control knob
INTRODUCTION
The device is equipped with a number of safety locks.
1. The device will not start if the jar is not properly placed and locked on base.
2. The device will not start if the lid on top is not properly closed and locked at the handle.
Please check before contact the customer service, whether these steps have been
followed
.
CLEAN BEFORE FIRST USE
Rinse the jar, the cutting blades and the lid in warm soapy water and dry the
parts carefully before use.
EN