Cleaning and care
Cleaning the spray arms
It is necessary to clean the spray arms regularly for hard water chemicals
may clog the spray arm jets and bearings.
To remove the middle spray arm,
hold the nut, rotate the arm clockwise to remove it.
To remove the lower spray arm,
pull out the spray arm upward. Wash the arms in soapy and warm water
and use a soft brush to clean the jets. Replace them after rinsing them thoroughly.
Open
*middle spray arm
*lower spray arm
Cleaning the door
To clean the edge around the door, you should use only a soft warm, damp cloth.
To avoid penetration of water into the door lock and electrical components,
do not use a spray cleaner of any kind.
Also, never use abrasive cleaners or scouring pads on the outer surfaces because
they will scratch the finish. Some paper towels can also scratch or leave marks on
the surface.
Attention!
•
Never use spray cleaner to clean the door panel for it could damage the door lock and electrical components.
It is not advised to use the abrasive agent or some paper towel because of the risk of scratching or leaving spots on the
stainless steel surface.
Caring for the dishwasher
To clean the control panel use a lighlty damp cloth then dry thoroughly. To clean the exterior use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any parts of the dishwasher.
• After every wash
After every wash, turn off the water supply to the appliance and leave the door slightly open so that moisture and odours not trapped inside.
• Remove the plug
Before cleaning or performing maintenance, always remove the plug from the socket.
• No solvents or abrasive cleaning
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products.
Use a cloth with warm soapy water only.
To remove spots or stains from the surface of the interior, use a cloth dampened with water an a little white vinegar, or a cleaning product
made specifically for dishwashers.
• When you go on holiday
When you go on holiday, it is recommend that you run a wash cycle with the dishwasher empty and then remove the plug from the socket,
turn off the water supply and leave the door slightly open. This will help the door seals to last longer and prevent odours from forming within
the appliance.
• Moving the appliance
If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can be positioned on its back.
• Seals
One of the factors that cause odours to form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a damp sponge
will prevent this from occurring.
16
