Daewoo DDAE8000SE, Руководство пользователя

Страница: 23 / 25

EN
22
4. OVERHAULING AND TROUBLESHOOTING
4-1 Overhauling and troubleshooting procedures
lf cannot generate electricity still, please contact with dealer of our company or with our company
directly.
4-2 Questions and Answers
If you do not understand anything or have any questions, please feel free to contact your local
dealer or with our company directly. Below is a list of sorne information you should have ready
before contacting your local dealer or us.
1. Model of diesel engine generator and engine model number.
2. State of residency
3. Number of hours of operating equipment along with the problem that occurred.
4. A detailed condition and time when the problem occurred, in other words,
climate and atmosphere.
5. PART LISTINGS
Overall view of engine generator assembly
Number Part Description Quantity
1 Series diesel engine 1
2 Starter Motor 1
3 Flywheel generator 1
4 Bolt 2
5 Voltage Regulator 1
6 Battery Cable(red,black) 2
7 Battery 1
8 Oil level sensor 1
9 Generator 1
10 Output panel assembly 1
11 Throttle cable 2
12 Connector assembly 1
13 Capacitor 1
14 Bolt 2
15 Voltage Regulator Bracket 1
16 Bolt 2
Exploded view of frame assembly
Number Part Description Quantity
1 Muffler cover plate 1
2 Muffler elbow 1
3 Left outer cover 1
4 Fuel gauge 1
5 Fuel tank sleeve 1
6 Main cover 1
7 Door knob 1
8 Right outer cover 1
9 Output panel assembly 1
10 Air cleaner cover 1
11 Lower chassis 1
12 Engine tray mounts 4
13 Engine/Generator tray 1
14 Wheels 4
15 Battery 1
16 Battery tie down 1
17 Long cover plate 1
Electric panel parts drawing
Number Part Description Quantity
1 Positive DC port 1
2 Negative DC port 1
3 Grounded bolt 1
4 Bolt 2
5 Large nut 1
6 Bolt 2
7 Boly 2
8 Large nut 1
9 Current adjusting switch 1
10 3 Prong socket 6
11 Bolt 6
12 Electric panel bolt 1
13 Electric panel 1
14 Starter switch 6
15 Large nut 1
16 Oil alert lamp 1
17 Hour meter 2
18 Hour meter bolts 1
19 DC fuse 1
20 Voltmeter 1
21 Nut 2
22 4 prong socket 1
23 Breaker bracket 1
24 Nut 2
25 Breaker 1
26 Wiring hamess 1
27 Electrical box 1
Generator head assembly
Number Part Description Quantity
1 Front end cover 1
2 Diode 2
3 M4 x 8 Bolt 2
4 Fan Blade 1
5 Bearing 1
6 Rotor Unit 1
7 Center bolt 1
8 Motor cover 1
9 Stator 1
10 Long bolt 4
11 Capacitar 1
12 Wiring Seat 1
13 M5 x 15 Bolt 6
14 Stator Unit 1
15 Dust Cover 1
Fuel system components
Number Part Description Quantity
1 Fuel Cap 1
2 Seal 1
3 Filtering cup 1
4 M5 x 10 screw 2
5 Fuel lever indicator 1
6 M6 x 2 5 Bolt 4
7 Large flat washer 6 4
8 Fuel tank lining 4
9 Shock absorbing gasket 4
10 Fuel tank 1
11 M6 Nut 4
12 O ring seal 1
13 Fuel tank filter 1
14 O ring gasket 1
15 Fuel filter cover 1
16 Cover 1
17 Wing nut 1
18 Fuel line 2
19 Fuel inlet pipe 1
20 High pressure fuel pump 1
21 High pressure fuel pipe 1
22 Fuel injector 1
23 Overfill tube 2
24 Fuel overfill pipe 1
6. REMOTE CONTROL INSTRUCTIONS
l. Basics
1). Be careful with the remote control and do not drop it as the remate control is a
precision-fabricated device.
2). If you decide to use the remote control for starting, you cannot use the start switch on the
generator, or else you may blow the fose out.
3). If the distance for the remate control reduces and or if the light is dark, you should replace the
battery in the remote contro1 (23A, 12V).
2. Operation procedures
I ). Remote control starting(DO NOT USE THE STARTING SWITCH). The generator will automatically
start when you press the "l" key twice. If starting in cold weather, please repeat this procedure
severa] times. NOTE: If the battery power is low, the remote control feature will not work properly.
2). If the remote control was chosen to start the generator, the remote control should be chosen to
stop the unit. To stop the unit, press the number "2" key and the generator will automatically stop.
3. Description of keys
1). Remote control start.
2). Remote control stop.