EN
8
CLOCK and ALARM CLOCK OPERATION
Note:
The time and alarm times can only be set when the radio is turned off .
TIME SET
1. The digits will fl ash after connecting power to the radio, or press and hold
down
“MEMORY TIME SET”
button (1) for approximately 3 seconds until the
display fl ashes.
2. Press
“HOUR / TUN-”
button (4) repeatedly to change the hour setting
.
3. Press
“MIN / TUN+”
button (5) repeatedly to change the minute setting.
4. Press
“MEMORY TIME SET”
button (1) to confi rm the time.
ALARM SET
This clock radio has dual alarms that can be set and used simultaneously and
the procedures are the same. Both alarms can either sound the buzzer or wake
up to radio.
Follow the instructions below to set alarm time 1. For alarm time 2, substitute
“AL1/VOL-”
button
(2) with
“AL2/VOL+”
button (3).
1. Press
“AL1/VOL-”
button (2) to view alarm time 1. The digits will fl ash.
2. Press
“HOUR / TUN-”
button (4) repeatedly to change the hour setting.
3. Press
“MIN / TUN+”
button (5) repeatedly to change the minute setting.
4. Press
“AL1/VOL-”
button (2) once to confi rm and digits will stop fl ashing.
ACTIVATING THE ALARM
1. Once the alarm time is set, press
“AL1/VOL-”
button (2) once for alarm with
buzzer (Indicator A will be
on) and twice for alarm with radio (Indicator B will be on).
2. Digits will stop fl ashing after a short while.
3. Press
“AL1/VOL-”
button (2) until all indicators off to turn off alarm.
4. When the alarm/radio sounds, press
“
”
button (6) to turn alarm off or press
“SNOOZE SLEEP / DIMMER”
button (7) for 9-minute snooze.
DISPLAY BRIGHTNESS
When the radio is off and the current time showing, press and hold
“SNOOZE
SLEEP / DIMMER”
button (7) to change the brightness of the display between
high and low.
