Daewoo DBU-51, Руководство пользователя

Страница: 12 / 35

ENG
12
The following label has been affi xed to the unit, listing the proper procedure for working
with the laser beam:
CLASS 1 LASER PRODUCT LABEL
This label is attached to the place as illustrated to inform
that the apparatus contains a laser component.
WARNING LABEL INFORMING OF RADIATION
This label is placed inside the unit. As shown in the
illustration. To warn against further measures on the
unit. The equipment contains a laser radiating laser rays
according to the limit of laser product of class 1.
SAFETY INSTRUCTIONS
1. READ INSTRUCTIONS. All the safety and operating instructions should be read before the
appliance is operated.
2. RETAIN INSTRUCTIONS. The safety and operating instruction should be retained for future
reference.
3. HEED WARNINGS. All warnings on the appliance and in the operating instructions should
be adhered to.
4. FOLLOW INSTRUCTIONS. All operating instructions should be followed.
5. WATER AND MOISTURE. The appliance should not be used near water, for example, near a
bathtub, washbowl, kitchen sink, laundrytub, swimming pool or in a wet basement.
6. VENTILATION. The appliance should be situated so that its location or position does not
interfere with its proper ventilation. Do not place on bed, sofa, rug or similar surface that
may block the ventilation openings, in a built-in installation, such as a bookcase or cabinet
that may impede the fl ow of air through the ventilation openings.
7. HEAT. The appliance should be situated away from heat sources such as radiators, stoves,
or other appliances (including amplifi ers) that produce heat.
8. POWER SOURCE. The appliance should be connected to power supply only of the type
described in the operating instructions or as marked on the appliance.
9. POWER CORD PROTECTION. Power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them.
10. POWER LINES. An outdoor antenna should be located away from power lines.
11. OBJECT and LIQUID ENTRY. Care should be taken so that objects do not fall and liquids
are not spilled into the enclosure through openings.
12. ESD WARNING. The display does not function properly or no reaction to operation
of any the control may due to the electrostatic discharge. Switch off and unplug the set.
Reconnect after a few seconds.