5
5. NOISE
The Morrison Petrol Hedge Trimmer has been given a rating of aadb. Therefore anyone operating or present
during operation should use protective hearing wear.
6. SAFETY INSTRUCTIONS
To use the hedge trimmer safely it is important to follow all instructions and information in the instruction
manual dealing with safety, assembly and machine operation. Anybody who will carry out machine operation
or maintenance should be familiar with the instruction manual. Children should not use the hedge trimmer.
When operating this unit the user should be vigilant of proximity to other people, animals and any potential
hazards. This hedge trimmer should be used in conjunction with any laws or bylaws. The manufacturer
cannot be hold liable if unauthorised changes were carried out to the machines and the changes resulted in
damage.
Caution! When using machine tools it is important to follow basic preventive measures. Please follow the tips
and instructions stated in the additional safety instructions.
1. Use the hedge trimmer in safe working conditions. The Morrison Hedge Trimmer is only designed for
outdoors use.
Use only outdoors to avoid build up of noxious gases.
Always inspect your working area for potential hazards before beginning work.
2. Keep a safe proximity to others. Always maintain a safe distance (outside of swing radius) from any other
persons,or animals.
3. Ensure safe tool storage. Machines that are not at use should be stored at a dry place if possible high up
alternatively they should be locked away so that other persons could not gain access to them.
4. Use the right tool for each job. Only use the Morrison Hedge Trimmer on work specifi ed by the manufactu-
rer.
5. Wear appropriate clothing. Wear clothes that are strong and not loose fi tting when operating machine.
6. Use personal protective aids. Wear safety shoes with steel toe boxes and non slippery soles.
7. Wear protective glasses. Objects can be fl ung away by the machine.
8. Wear hearing protective aids. Wear hearing protective aids, e.g. ear plugs.
9. Hand protection. Wear thick gloves – good protection is provided by gloves made of leather.
10. Hedge trimmer transportation. Only transport the hedge trimmer when turned off and with blade cover
in position.
11. Do not use hedge trimmer while impaired. Never use this machine when under the infl uence of alcohol,
drugs or any mind altering substance. Do not use when suffering injury that will affect use.
12. Switch unit off before refuelling. Switch hedge trimmer off and allow to cool before refuelling.
Never use fuel near naked fl ame. Be sure to avoid smoking near fuel and machinery.
13. Usage period and breaks. After a longer period of usage you might experience problems with blood
circulation in your hands due to the vibrations. The period of usage can be extended by wear ing suitable
gloves and taking regular breaks. Please be aware that the time of usage is lowered by personal dispositions
to bad circulation, a low outside temperature or a fi rm grip of the tool when working.
14. Watch for damaged parts. The machine should be carefully inspected before use. If there is damage of
any sort this should be assessed ,and if necessary repaired by a Garden Product Service person before
use.
15. Make sure that the protective cover of the hedge trimmer works perfectly and it is installed in such a way
that the knife teeth are always covered.
16. Turn off machine before repairing. Ensure machine is turned off before beginning repair/adjustment
work.
Caution!! Using other knife bars and other fixtures and extensions that are not expressly recommended can
endanger people and property.
The machine can be used only for the designed purpose. Any machine usage at variance with its purpose
is considered unprofessional usage. The user is liable for the damage caused to property and injuries resul-
ting from this unprofessional handling, and not the manufacturer.
The manufacturer cannot be liable in case the machine was modifi ed or used unprofessionally and damage
arose as the result of these actions.
When handling the machine professionally there is always some risk that cannot be eliminated.
The machine type and construction might present the following potential risks:
• Contact with an unprotected knife bar (danger of cutting yourself)
• Touching the trimmer in operation (danger of cutting yourself)
• Unexpected, sudden movements of the cut material and its parts (danger of cutting yourself)
• Spurning of faulty knife teeth and parts of knife bar (danger of cutting yourself)
• Hearing injuries if appropriate safety aids are not worn.
• Creation of harmful dust or gas when using the machine in closed premises (sickness).
• Do not use deformed or damaged cutting knives (knife bar destruction).
If you have any doubt over condition of petrol hedge trimmer, consult a specialist garden product service
person before beginning use.
7. BEFORE THE FI RST USE OF THE MACHINE
Caution! Before you start using the hedge trimmer make sure it is in a sound operational condition. If you
have any doubts, do not start the machine!
Pay attention mainly to the following points:
• Cutting knives are installed in correct position
• All switches are going easily
• Spark plug is installed safely. If the plug is loose sparking can occur followed by ignition of the created
mixture of fuel and air.
Before starting the machine all necessary safety and protective devices must be duly installed in their posi-
tions.
The cutting knife must be loose enough to move.
Before starting the hedge trimmer make sure the knife is installed correctly and the movable parts are not
jammed.
Caution! If in any doubts contact a specialist grade product service person.
8 STARTING THE MACHINE (PICT. A)
1. Pour mixed fuel into the relevant tank. Make sure you do not spill any fuel (danger of ignition). Fuel mix
composition can be found in Chapter 12.
2. Move at least 3 metres from the place of refuelling. Do not start the machine in closed or badly ventilated
premises.
3. Click switch (3) into the ON position. If starting a cold engine the choke switch (8) must be moved to the
left.
4. Using the hand fuel pump (9) fuel can be pumped into the carburettor.
This will lessen the number of start attempts after a longer break.
5. Now place the hedge trimmer on the ground, straddle the machine and place one hand on the side grip
(7). Use your other hand to pull the starting cable (1) and wait for the engine to start.
ATTENTION! Do not pull too much; the cable length is 90 cm. Watch the movable knife.
6. Once the engine is running, pump the throttle fully a few times. After about the fourth time you can move
the choke to the right.
7. Using the tongue (5) you can move the handle. If you want to switch off the machine, put the switch (3)
into the “OFF” position.
9
180°
9. HEDGE TRIMMER FUNCTIONING
The Morrison hedge trimmer is equipped with quick stop function which stops the knife immediately once
the throttle is released to prevent a possible accident.
If you want to switch off the machine, you must move the switch (pict. a; item 3) into the “OFF”position.
• When cutting hedges comply with regulations valid in the relevant country and local regulations.
• If the branches are bigger than the maximal cutting power, they must be removed by other machinery.
• If heavy pruning is required, you should work in stages.
10. WORK SAFELY AND WITH PRUDENCE
1. Hold the hedge trimmer safely in both hands!
2. Trim and cut only wood and wooden objects!
3. Work with consideration and do not threaten anyone when cutting. Work calmly with prudence!
4. Work when it is light and visible!
5. Constantly watch the cutting knife!
6. Never cut below shoulder height!
7. Work only with a sharpened and correctly installed cutting knife!
8. Do not stand on a ladder when working!
9. Work only on sound and stable ground!
11. MAINTENANCE INSTRUCTIONS
ATTENTION! The following instructions are valid for standard working conditions. In case of aggravated
conditions such as heavy dust contents, wood with a high content of resin or longer working periods the
interval must be shortened accordingly.
Before you start work check the following:
• Throttle
• Visually check the whole machine
• Position of the knife bar or the cutting knife
• Degree of sharpness
• Wear and tear or the guiding bar damage
After you fi nish working check the whole machine and clean it.
Regularly check and maintain the following:
• Air fi lter (clean if necessary)
• Spark plugs pict. a; item 6 (if replacement is needed)
• Cutting knife sharpness (clean well and lubricate)
When repairing or maintaining the hedge trimmer, have it always switched off.
12. FUEL DATA
Refuelling
Mix unleaded petrol with brand oil for two-stroke engines with air cooling in the 1:30 ratio. This means that
for example 5 l of petrol is mixed with 0,16 l of oil.
13. REPAIRS/ENGINE FAILURES
Repairs that require special professional knowledge should be carried out by authorised service centres.
Unprofessional interference can damage the machine or endanger your safety.
Engine failures
