Daewoo DACNQ740S Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 49

Daewoo DACNQ740S Скачать руководство пользователя страница 35

Spark plug

- If the machine is low on power, difficult to start or runs poorly at idle speed: always check the
spark plug first before taking other steps.
- Ensure that the spark plug cap and ignition lead are undamaged to avoid the risk of electric shock.
- If the spark plug is dirty, clean it and at the same time check that the electrode gap is 0.5 mm.
Replace if necessary.

These factors cause deposits on the spark plug electrodes, which may result in operating problems
and starting difficulties.
- An incorrect fuel mixture (too much or incorrect type of oil).
- A dirty air filter.

Functional inspection

General inspection

- Check that nuts and screws are tight.

Drive belt

Tensioning the drive belt

The tension of a new drive belt must be readjusted after one or two tanks of fuel have been used.
When the machine is equipped with a friction retarder, a scraping sound can be heard from the
bearing housing when the blade is turned by hand. This is quite normal. Please contact he workshop
if you have any questions.
The drive belt is enclosed and well protected from dust and dirt.

- Loosen the three bolts (A) one turn anticlockwise.

NOTICE! A dirty or blocked air intake results in the machine overheating which causes
damage to the piston and cylinder.

NOTICE! Always use the recommended spark plug type! Use of the wrong spark plug
can damage the piston/cylinder.

33

«
...
33
34
35
36
37
...
»

Содержание DACNQ740S


















































Отзывы:

Нет отзывов