background image

27

Moulded plugs

If it is necessary to remove a moulded plug from the mains cable, you should cut it off and

replace it with a suitable replacement.

You cannot use the moulded plug for any other appliance, so remove the fuse and throw it

away immediately and safely to prevent anyone, especially children, from plugging it into a
wall socket which would be very dangerous.

If the mains lead ever needs replacing, a qualified electrician should replace it with a flexible

cord from the manufacturer.

After you have replaced a fuse in the plug, you must put the fuse cover back on. If you have

lost the fuse cover, you must get a replacement cover. The replacement fuse cover should be
the same colour as the coloured insert in the base of the plug or the colour that is embossed in
words in the base of the plug, or anywhere else on the plug. Always mention this colour when
you order a replacement fuse cover.

Only 5-amp replacement fuses which are ASTA approved to BS 1362 should be fitted.

Caution:

When you are using this video on AC 230V ~ mains supply, please remember
that when the video is on stand-by, it is not disconnected from the mains
supply. However, it is perfectly safe to leave the video connected to the mains
supply.

This symbol means that this unit is double insulated, an earth connection
is not necessary.

Caution :
To prevent electric shock, do not remove any covers.

Caution:
There are no parts inside which you can repair yourself. Always get a
qualified service engineer to carry out any repairs.

GENERAL UK(T30)  01.3.17 11:41 AM  ˘

`

27

Содержание CT Series

































Отзывы: