Batteries
• Remove the battery compartment cover on the back of the remote
control by pushing back the clip and removing.
• Insert 2 x AAA batteries (not supplied) into the battery compartment
observing the polarity markings on the inside.
• Replace the battery cover.
• Do not mix old and new batteries together.
• It is recommended that batteries are removed if the remote is not to
be used for a long time period.
Waste batteries should not be disposed of with household
waste. Please recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
Internal Water Tank and Draining
During normal use, a majority of the moisture collected will be
evaporated internally by the unit and expelled through the exhaust.
However, the internal water tank will eventually fill to its maximum
capacity and the Water Full (WF) indicator will illuminate on the control
panel to show the tank is full.
To empty the water tank, take the unit outside, remove the bung from
the drain at the bottom rear left of the unit and allow the tank to empty.
Alternatively connect a hose to the drain and lead it outside to the drain
the tank.
NB
ensure the drain bung is replaced before using the unit again.
The Water Tank Drain bung on
the bottom left of the rear panel
(arrowed).
