Daewoo CB647M-EX, Руководство пользователя

Страница: 71 / 116

Table 2-2. CB647M-LX/EX Memory Configurations
3. Installing and Removing DIMMs
To install the DIMMs, locate the memory banks on the motherboard and
perform the following steps :
1. Hold the DIMM so that notched edge is aligned with the notch on the
DIMM socket(Figure 2-1).
2. Insert the DIMM at a 90 degree angle.
3. Gently push the DIMM straight down until it locks into place(past the
release tabs).
Figure 2-1. Installing a 168-pin DIMM
To remove DIMMs, follow the steps below:
1. With both thumbs (or fingers), press the release tabs away from the socket.
2. With the DIMM free from the release tabs, lift the memory module up
and place in the anti-static bag or package.
2. Installation
2 - 4
D I M M
D I M M 1
1 1 8 M B
1 1 6 M B
1 3 2 M B
1 6 4 M B
1 2 8 M B
D I M M 2
1 1 8 M B
1 1 6 M B
1 3 2 M B
1 6 4 M B
1 2 8 M B
T O TA L
D I M M 1 + D I M M 2
The combination of memory
size is from 8MB to maximum
256MB. All DIMM sockets
can use either SDRAM or
EDO memory.
CB647M-LX/EX(2장) 00.9.18 3:52 PM 페이지2-4