background image

Federal Communications Commission Statement

This equipment has been tested and found to comply with the limits for a
Clss B digital device, pursuant to part 15 of the FCC Rules. These limit are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
i n s t ructions, may cause harmful interference to radio communications.
H o w e v e r, there is no guarantee that interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipmentand re c e i v e r.
- Connect the equipment into an outlet on a circuit diff e rent from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Changes or  modifications  not expressly  approved by the party

responsible  for compliance  could void  the  user’s  authority  to  operate

the equipment.

1

CB647M-LX/EX(1장)  00.9.18 3:52 PM  페이지1

Содержание CB647M-EX





















































































































Отзывы: