Electrical Connections
This appliance is fitted with a fused three-pin plug to BS 1363.
If the plug has to be removed, it should be cut off and carefully
disposed of immediately. To avoid a possible shock hazard, do
not insert the discarded plug into a mains socket.
Fitting a new plug
If for any reason you need to fit a new plug, the flexible mains
lead must be connected as shown below. The wires in the mains
lead fitted to this appliance are coloured in accordance with the
following code:
If colours of the wires in the mains lead of this appliance do not
correspond with the coloured marking identifying the terminals in
your plug, proceed as follows:
The wire which is coloured Blue must be connected to the
terminal which is marked with the letter N or coloured Black. The
wire which is coloured Brown must be connected to the terminal
which is marked with the letter L or coloured Red. Before refitting
the plug cover check that there are no cut or stray strands of wire
inside the plug. Use a 5 Amp BS 1362 fuse, only BSI or ASTA
approved fuses should be used. If you are in any way unsure
which plug or fuse to use, always refer to a qualified electrician.
Brown wire = Live (L)
Blue wire = Neutral (N)
Connect Blue
to Neutral (N)
Connect Brown
to Live (L)
Ensure the outer sheath
is securely held by the
cord clamp
