Daewoo BLT-32U10A, Руководство по обслуживанию

Страница: 19 / 60

-19-
5. SERVICE MODE
Using the Service Remote controller(R-34SVC), you can enter service mode
directly.
Key Menu Sub Menu Default Value Description
S1 Heat Run Mode Full White To enter into Heat Run Mode
S2 Gumi Ch Map Write
Gumi Ch Map Write To set Gumi factory channels directly
EDID Write HDMI EDID Writing automatically.(same function on S4)
S3 Volume Test Volume Min
To set sound(display in sequence)
Press S3 key again and again, change like this :
'Volume Min' - 'Volume Middle' - 'Volume Max'
- 'Balance L' - 'Balance R'
S4 HDMI EDID WRITE EDID Write…Wait!
When it is finished, display like this :
'FINISH
HDMI1 EDID Success, HDMI2 EDID Success'
S5 Index All On Turn on the all LED of INDEX(Smart Icon)
S6 Panel Test
To check the defective pixel of LCD panel
Using
◀/▶
buttons, 'Full Red - Green - Blue - White -
Black - Gray'
S7
DEMPOL Ch Map
Write
To set DEMPOL channels directly
S8 White Balance
CUT OFF_R 0
To display offset and drive value at mode above
CUT OFF_G 0
CUT OFF_B 0
DRIVE_R 0
DRIVE_G 0
DRIVE_B 0
S9
S10 Select Type
MODEL SL-601T
Using
◀/▶
buttons,
select between 'SL-601T' and 'SL-601P' and 'SL-
601M'
PANEL LG_32
Using
◀/▶
buttons, select between 'AU_26' -
'SAMSUNG_26' - 'LG_32' - 'SAMSUNG_32' - 'LG_37'
- 'SAMSUNG_37' - 'LG_42' - 'SAMSUNG_42'
BUYER Daewoo
Using
◀/▶
buttons,
select between 'Daewoo' and 'IRAN' and 'Newziland' -
'Others'
S11
Bus Stop No Using
◀/▶
buttons, select 'No' or 'Yes'
EEPROM Reset >>> If you want to EEPROM Reset, press OK button.
Date and Version Display the version of soft
S12 Shipping Mode To initialize TV and make TV standby mode