Fader Control (1):
Fader control adjusts the volume separation between the front & rear speakers.
1. Select the fader control mode using the sound mode selector button ( 2).
2. When FAD appears, rotate volume control knob (1) clockwise to decrease the volume
of the rear speakers.
Fader level display will change from FRONT 01 up to FRONT 15 .
3. To decrease the volume of the front speakers, rotate volume control knob(1) counter-
clockwise.
The fader level display will change from REAR 01 up to REAR 15 .
4. When the fader level display shows 0 , volume is centered between front and rear
speakers.
5. After adjusting, the display will return to full audio system information in about 5seconds.
Balance Control (1):
Balance control is used to adjust the separation between left and right speakers.
1. Select the balance control mode using the sound mode selector button (2).
2. When BAL indicator appears, rotate volume control knob (1) clockwise to decrease the
volume of the left speakers.
The balance level signal will change from RIGHT 01 to RIGHT 15 .
3. To decrease the volume of the right speakers, rotate volume control knob counterclock-
wise.
The balance level signal will change from LEFT 01 up to LEFT 15 .
4. When 0 appears, output is centered between left and right speakers.
5. After adjusting, the display will return to full audio system information in about 5seconds.
EQ (Sound Style) Control (1):
Select one of the pre-defined EQ (sound styles).
1. Select the EQ control mode using the sound mode selector button (2).
2. When EQ OFF appears, rotate volume control knob (1) clockwise or counterclockwise
to change the EQ (sound style).
* Each time you rotate volume knob (1), EQ mode changes as follows;
CLASSIC -> POP -> ROCK -> JAZZ -> VOICE -> CLASSIC
3. After adjusting, the display will return to full audio system information in about 5seconds.
5
CD PLAYER OPERATION
1. Press the power knob (1) to activate the audio system.
2. Insert a CD disc into the disc slot (8) label side upwards.
Audio system playing the first track Automatically.
3. If a CD disc is already inserted in the disc slot, press the CD button.
Audio system will play the last track you listened to.
4. To eject the CD disc, press the CD eject button (9).
If the ejected disc is not taken out of the disc slot within 10 seconds, the CD disc will
automatically loaded again.
5. After the CD disc is ejected, the audio system will change to the previous mode (radio or
CDC if possible).
8
Play & Pause (7):
Press the play knob (7) to play CD disc. Pressing again this knob (7) in the playback mode
will cause the audio system to enter in to the CD pausing mode.
In the pause mode, sound is not heard.
Track up & down (4):
Track up & down rotary knob (4) allows you to make quick selections from your CD disc.
1. To play the next track, rotate this knob clockwise less than 1 second.
Each time you rotate the knob, the disc will skip to the next track.
2. To play the previous track, rotate this knob counterclockwise less than 1 second.
Each time you rotate the knob, the disc will skip to the previous track.
At power off & on, CD play the last position.
