Daewoo 103F, Руководство пользователя

Страница: 7 / 12

English - 4 English - 5
CONNECTING THE POWER CORD
1. Plug the power cord into the AC receptacle located at the back
of the monitor.
2. Plug the other end of the power cord into the AC outlet.
POWER MANAGEMENT SYSTEM
If you use the monitor with a computer that complies with the
power-saving program, you can set the monitor to go blank when
the system has remained unused for a period of time. To specify
the period or to disable this feature, set the system timeout field
of the computer’s system setup program or use special software
for power-saving. See the computer user’s manual for the details
of using the system setup. While the monitor is in power-saving
mode (blank screen), it consumes less power than when it is in its
normal state. The color of the power LED will indicate the state.
To restore the screen image, press any key of your keyboard or
move your mouse. If the signal cable is connected loosely or
disconnected, the power-saving feature will not operate.
DISPLAY DATA CHANNEL FOR PLUG AND PLAY
If you use the monitor with a computer that complies with
DDC1/2B/CI of VESA, the host video card automatically
configures itself without your intervention in a way that best fits
the attached monitor. The Display Data Channel(DDC) allows
the monitor to inform the host system about configuration
information for optimum use of the monitor. Use of the video
card utility is not required to match the resolutions and refresh
rates of the monitor and video card.
CONNECTING THE BNC SIGNAL CABLE
1. Turn off the computer and monitor.
2. Connect the 5 BNC connectors from the signal cable to the
monitor.
3. Push in and turn the connectors clockwise until they are
locked in place.
R G B HS/HVS VS
BNC signal cable
(Optional Accessory)
If your power cord is PC-to-Monitor type, plug the other end
of the power cord into the AC receptacle in the computer.