Daewoo International DTC-760, Руководство пользователя, Страница: 11 / 26

EN
11
INSTALLATION
Insert one end of line cord into LINE jack of the phone, the other connect with local
network.
Use coiled cord connect base unit and handset.
Set the dial mode to PULSE or TONE dialing according to your local network.
RECEIVE A CALL
From handset
1. Pick up the handset and talk to the other party.
2. When fi nished, return the handset to the base.
Switching to speakerphone
1. When using the handset, press key and return the handset to the base.
2. When fi nished, press key again.
From speakerphone
1. When the telephone rings, press key and talk to the caller. For the other party
to hear your voice clearly, speak into the speaker from a distance of 32 cm or less.
2. When fi nished, press key again.
MAKING CALLS
From handset
1. Pick up the handset.
2. When you hear the dial tone, dial the desired number.
3. When fi nished, return the handset to the base.
From Speakerphone
1. Press key.
2. When you hear the dial tone, dial the desired number.
3. When fi nished, press key again.
Redial
1. Pick up the handset or press key.
2. Press
RD key, the last dialed number will be dialed again.
ONE TOUCH MEMORY OPERATION
• Store the number in one-touch memory
1. Pick up the handset or press key you will listen the line signal, then press
key around 3 seconds until you hear a “Di-“sound and the line signal will stop.
2. Dial the phone number you want to store (during the storage you may hear some
signal in the line saying that the number dialed is not correct, you should not take in