EN
CAUTION: TO PREVENT ELECTRIC SHOCK, ENSURE TO
INSERT 2 PIN PLUG CORRECTLY IN TO MATCHING
SOCKET OR ADAPTOR
To reduce the risk of electric shock, do not remove cover
(or back).
There are no user-serviceable parts inside. Please refer any
servicing to qualifi ed service personnel.
This symbol, located on
the back or bottom of
the unit, is intended to
alert to the user to the
presence of uninsulated
“dangerous
voltage”
within
the
Product’s
enclosure
that
may
constitute a risk of electric
shock to persons.
This product utilizes a Class 1 laser
to read Compact Discs. This laser
Compact Disc Player is equipped
with safety switches to avoid
exposure when the CD door is
Open and the CD player’s lid
Damaged. Invisible laser radiation
is present when the CD player’s is
open and the system’s interlock
has failed or has been damaged.
It is very important that you avoid
direct exposure to the laser beam at
all times. Please do not attempt to
Damage or bypass the safety
switches.
This symbol, located on the
back or bottom of the unit, is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in
the literature accompanying
the appliance.
10
Warnings and Precautions
WARNING: Changes or modifi cations to this unit not approved by the party
responsible for compliance could void the user’s authority to operatic the
equipment.
WARNING: To prevent fi re or shock hazards, do not expose this unit to rain or
moisture.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc)
batteries.
NOTE:
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 5 of the FCC Rules.These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Re-position or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit diff erent form that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
