DAEWOO ELECTRONICS T008, Руководство по обслуживанию

Страница: 10 / 19

10
(3)Option set
1)OPT
Bit Function
Status
“
0
”
Status
“
1
”
Bit7 The algorithm of ASM ASM doesn't judge IFLOCK with case 4 ASM judge IF LOCK with case 4
Bit6 The algorithm of ASM ASM doesn't judge AFT area with case 4 ASM judge AFT area with case 4
Bit5 VT Down of AFT when No Signal no use use
Bit4 Fjp_bb_v_freq C_BB_V_FREQ_313H C_BB_V_FREQ_312_5H
Bit3 Fjp_digital_aft no use use
Bit2 V MUTE V-MuteOn/Off when CH changes Off On
Bit1 Fvmute_type During POS change Y-MUTE RGB-CUT Off DC
OPT
Bit0 Fjp_menu_background no use use
2)OPT1
Bit Function
Status
“
0
”
Status
“
1
”
Bit7 Fjp_calendar no use use
Bit6 Fjp_eyecare no use use
Bit5 Fjp_tint normal inverse
Bit4 Fjp_screen no use use
Bit3 Fjp_rf_pwron AV status memory only TV while power on
Bit2 Fjp_ntsc358 multi color system only358ntsc
Bit1 Fjp_uhf p3 p2
OPT1
Bit0 Fjp_message no use use
3)OPT2
Bit Function
Status
“
0
”
Status
“
1
”
Bit7 Fjp_mute_process no special process add special process for mute
Bit6 Fjp_refresh_tuner no refresh refresh the registers of FS tuner at
the interval of 256ms
Bit5 Fjp_pwr_delay nouse 1S delay power on
Bit4 Fjp_power_option stand by status must use remote control to open
TV
Bit3 Fjp_woofer no use use
Bit2 Fjp_ta1343n no use use
Bit1 Fav_chg_mute not mute mute
OPT2
Bit0 Fslice_level(use to control the seventh
bitof2in1 0x1e register) 40%( set bit6 of register 0x1e of 2in1 to
0) 35%(set bit6 of register 0x1e of
2in1 to 1)
4)OPT3
Bit Function
Status
“
0
”
Status
“
1
”
Bit7 No use
Bit6 PP mode option
VID
mode Contrast Brightness Sharpness Colour
Standard 100 50 50 50
Dynamic 80 75 60 50
Mild 50 40 30 40
Movie 60 40 50 50
Nature 75 50 40 45
EK
mode Contrast Brightness Sharpness Colour
Standard 50 50 50 50
Dynamic 100 75 60 50
Mild 40 50 30 50
Movie 100 40 50 50
Nature 75 50 40 50
Bit5 Fjp_pos_av_option no use using local pos key to enter AV while no local
TV/AV key
Bit4 Fjp_mute_exmute no use use
Bit3 Fjp_50_60hz_control no use use
Bit2 Fjp_panel_power panel power key is permitted while panel lock panel power key is forbidden while panel lock
Bit1 Exmute while pos
change exmute output no exmute
OPT3
Bit0 Extend mode attenuation according to effect1 -5db
5)AOPT
Bit Function
Status
“
0
”
Status
“
1
”
Bit7-6 No use AOPT
Bit5 Fjp_dvd_output following AV1 following AV2(pin56 or pin61)