®
Listening To The iPod
®
®
This model provides 5 different iPod adaptors for different dockable iPod
®
models. If no iPod will be docked for an extended period of time, it is
recommended to cover the dock connector by the“Dust Cover” (included).
®
®
1. Select the suitable iPod adaptor for your iPod model, see the
®
“iPod adaptor table” in a previous section of this manual.
®
2. For docking iPod Nano, slide the dock
®
connector to the left.For other iPod models,
slide the dock connector to the right. Plug the
®
®
iPod adaptor on the iPod docking area.
®
3. Insert your iPod with its Dock Connector
faced downward to the Dock connector of
this unit.
DIR+
+10
FF
FR
FUNCTION
MEM
MODE
SLEEP
+
-
SNOOZE/LIGHT
USB
®
Insert iPod to
the docking
station
®
Plug the iPod
adaptor to the
docking area
®
Charging the iPod Battery
®
With the AC-DC Adaptor powered to the unit, once your iPod connected to
®
®
the iPod docking station, the unit recharges the iPod battery (not apply for
the AM or FM radio mode).
4. Press the
POWER
button to switch on the unit.
5. Press the
FUNCTION
button repeatedly until the “iPod” indicator shows
®
on the display then switch ON your iPod .
®
6. Press the
PLAY/PAUSE
button from your iPod to pause or resume
®
iPod playback.
7. Press the
/-
button on this unit to adjust your desired volume
level.
NOTE: The Volume level cannot be adjusted by the volume control of your
®
iPod after being docked.
8. If necessary, select other feature by operating those controls from your
®
iPod as usual. For example, you may select other file (song) by pressing
®
the or button from your iPod ; depress and
®
hold the or button of your iPod for fast-rewinding or fast-forwarding
during playback.
®
9. To remove the iPod from the unit, press and hold the
PLAY/PAUSE
®
button of your iPod for three seconds to switch it off and then gently take
it out from the docking station.
Listening To The MP3 Player
This unit provides an USB docking station for the connection of your USB dockable
MP3 player and playback the music through the speakers of this system.
1.
Insert the USB dockable MP3 player into the USB docking station.
2. Press the
POWER
button to switch on the unit.
3. Press the
FUNCTION
button repeatedly until the "USB" indicator shows
on the display.
4. Press the
PLAY/PAUSE
button to start playback music.
5. Press the
VOLUME
+/-
button to adjust your desired volume level.
6. If necessary, you may operate the unit by pressing following buttons:
(a) To select previous or next file (song) by pressing the or button.
(b) Press the
PLAY/PAUSE
button to pause or resume playback.
(c) Press
DIR+
button to advance to next directory.
(d) Press
+10
button to advance 10 songs (files).
7. To remove the MP3 player from the unit, press the
STOP
button to stop
playback then press the
POWER
button to switch off the unit. Gently
take out the MP3 player from the docking station.
Listening To An External Audio Source
The unit provides the auxiliary audio signal input for the connection of an
external audio device. You may connect an audio cable (not included) with
3.5 mm stereo plug to the
AUX IN Jack
located at rear of the unit. Connect
the other end of the cable to a Line Out Jack or Headphone Jack of your non-
dockable MP3 player, CD player and older, non-dockable iPods then listen to
your external source through the speakers of this system.
1. Connect an audio cable (not included) with 3.5 mm stereo plug to the
AUX IN Jack
located at rear of the unit.
2. Connect the other end of the cable to a Line Out Jack or Headphone Jack
of your external audio device.
3. Turn on the external audio device.
4. To select auxiliary audio input, press the
FUNCTION
button repeatedly
until AUX
mode is reached. The display will show the “AUX” indicator.
5. The volume level can now be controlled through the main unit. Operate all
other functions on the auxiliary device as usual.
12
13
NOTE:
(1) If you connected the Line Out Jack of your external device then you only
need to adjust the volume control of this unit.If you connected the
Headphone Jack of your external device then you may need to adjust
both the volume control of your external device and the volume control
of this unit to find the most desirable volume setting.
(2) Press the
POWER
button to turn off the unit when you finish listening.
Don't forget to switch off the power of your external device as well.
Specifications
Power Supply
Power Adaptor :
Input:
AC 120V ~ 60 Hz (For USA)
AC 230V ~ 50 Hz (For EU)
AC 100V ~ 50/60 Hz (For Japan)
AC 240V ~ 50Hz (For Australia)
Output:
DC 10V / 1400mA
Battery Back-up for Clock:
DC1.5V “AAA” (UM-4) Battery x 2 (not included)
Frequency Range
USA's Radio Broadcast System
AM 520 – 1710 kHz, 10kHz tuning step
FM 87.5 – 108 MHz, 0.1MHz tuning step
EU's Radio Broadcast System
AM 522 – 1620 kHz, 9kHz tuning step
FM 87.5 – 108 MHz, 0.05MHz tuning step
Japan's Radio Broadcast System
AM 522 – 1629 kHz, 9kHz tuning step
FM 76.0 – 108 MHz, 0.1MHz tuning step
Australia's Radio Broadcast System Same as EU's system
•
Do not subject the unit to excessive force, shock, dust or extreme temperature.
•
Do not tamper with the unit's internal components.
•
Clean your unit with a damp (never wet) cloth. Solvent or detergent should
never be used.
•
Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
•
Keep your unit away from heating appliances and sources of electrical noise
such as fluorescent lamps or motors.
Resetting the Unit
If the unit is subjected to a severe power surge or electric shock, it is possible
that the internal microcontroller may “lock up” and the unit will not respond to
any commands from the top panel controls.
1. In this event, unplug and then reconnect the AC power plug into the wall
outlet.
2. Use a straightened paper clip, toothpick, or similar blunt object to press the
RESET
button located at rear of the main unit (see figure below). The reset
operation clears the system memory and all of your previous settings will
be erased.
Caution:
DO NOT use a sharp, pointed object to press the
RESET
button.
It may damage the reset switch inside the unit.
RESET
AUX
DC 10V
EXTERNAL FMANT
RESET button
Care and Maintenance
14
15
THE SPECIFICATION AND EXTERNAL APPEARANCE OF THE
SET ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
