DAEWOO ELECTRONICS KOR-637V, Руководство по обслуживанию, Страница: 17 / 36

1
6
10. To remove UV lamp assembly.
1) Remove the screw which sec u re the UV lamp assembly to the top-plate.
2) Remove the screw which hold the socket starter *O to the cover lamp.
3) Remove the socket starter *O from the cover lamp by pushing up two snap fits.
4) Remove the socket starter *I from the socket starter *O.
5) Remove the terminal
s tarters from the socket starter *I.
6) Remove the starter glow from the socket starter *I.
7) Remove the lamp germicidal from the cover lamp.
DISASSEMBLY AND ASSEMBLY
8) Remove the socket lamp.
9) Remove the terminal lamp.
10) Reverse the above steps for reasembly.
11. To remove the ballast.
1) Remove two screws holding the ballast.
2) Remove the ballast.
3) Re
verse the above steps for reasembly.