DAEWOO ELECTRONICS KOR-63470S, Руководство по обслуживанию

Страница: 7 / 24

Variable power setting Approximate Percentage
Power level Symbol (KOR-63470S) of Power
HIGH MAX 100%
MED HIGH 700W 88%
MEDIUM 580W 73%
LOW STAGE 470W 59%
DEFROST 17%
HEAT 26%
GENTLE HEATING 18%
6
OPERATIONS AND FUNCTIONS
1. Connect the main lead to an electrical outlet.
2. After placing the food in a suitable container, open the oven door
and put it on the glass tray. The glass tray must always be in
place during cooking.
3. Close the door securely.
4. Choose cooking power level by setting V.P.C knob to the desired
position. Refer to cookbook for recommended power levels.
5. Determine cooking time. Consult cookbook for recipe timing.
Oven light turns on and cooling fan starts to operate. Microwave
cooking starts.
6. You may open the door while the oven is operating. As soon as
the door is opened, the safety mechanisms stop the generation of
microwave power and the operation of cooking timer.
If you wish to change the time during cooking, simply adjust the
timer to the desired time.
7. When the timer reaches zero, a bell will ring and the unit will turn
off. Oven light turns off. If additional cooking time is needed and
the door is closed, the oven will automatically start when the timer
is reset.
Variable power cooking
ON and OFF cycle time of mechanical V.P.C switch is 30 seconds.
When the V.P.C knob is set to the desired position and timer knob to the desired position, the V.P.C switch has a cycle
(ON/OFF time(sec.)) listed below.
NOTE
1. When setting timer for less than 2 minutes,
tum the timer past 2 minutes and then
return to the correct timer setting.
2. Various clicking noises may be heard
when turning V.P.C knob. This is normal
and does not affect the operation of your
microwave oven.
Make sure the oven is properly installed and plugged into the electrical outlet.