13
CHILD SAFETY LOCK
The safety lock prevents unwanted oven operation such as by small children.
To set, press and hold STOP/CLEAR for 3 seconds, LOCK indicator lights.
To cancel, press and hold STOP/CLEAR for 3 seconds, LOCK indicator goes off.
POWER SAVE MODE
This function is used for saving energy.
To set, press and hold CHECK pad for 3 seconds. The oven will beep and nothing appears in the
display. Now the oven is in power save mode.
To operate the oven in power save mode, press any pad. Then “ : 0” will show and the operation of
all function key will be same as in normal mode.
But, if there is no operation within 10 seconds in clear mode or while manipulating the key, all the
contents of display will disappear.
To cancel, after press any pad, press and hold CHECK pad for 3 seconds.
Then the oven is again available for normal use.
MUTE FUNCTION
To set, press and hold DOUBLE QUANTITY pad for 3 seconds.
The display will show “MUTE” for 1 second.
Then you will not hear beeps, when you press any pad.
To cancel, press and hold DOUBLE QUANTITY pad for 3 seconds.
TO STOP THE OVEN WHILE THE OVEN IS OPERATING
1. Press STOP/CLEAR pad.
• You can restart the oven by touching START pad.
• Touch STOP/CLEAR once more to erase all instructions.
• You must enter in new instructions.
2. Open the door.
• You can restart the oven by closing the door and touching START.
NOTE: Oven stops operating when door is opened.
ABNORMAL MESSAGE
E10
• “E10” message occurs when the total sum of the stage cooking time is
greater than 20 minutes in full power or 60 minutes in other power levels.
• Press STOP/CLEAR key and try again.
E20
• “E20” message occurs when EEPROM is not able to read cooking data from
itʼs memory or write cooking data on itʼs memory.
• Unplug the power and call for service.
DEAN_KOM-9P5CES_M-9P1C9A(영).indd 13
15. 12. 29. 오전 11:38
