16
Changing User Options
User Options can be changed to suit individual preferences.
1. Open the door.
• Display turns off.
2. Press and hold number 2 pad for a while.
• When the oven enters Option mode, it will show "OP:--" in the
display.
3. Press a number pad to be programmed. (0~9)
• It will show a option number in the display.
4. Press the number pad again to change the option.
Each time the number pad is pressed, option will change.
5. Press START pad to save changes.
• To change additional options, repeat steps 3 and 4.
1
Cook Ending Signal
2
Repeat Feature
3
Key Beep On/Off
4
Keypad Activating Time
5
On-the-fly Feature
6
Reset on Door open
7
Maximum Cooking Time
8
Manual Programming
9
Multiple Digit Entry
0
Clean Filter Message
Pads
Display
User Options (Factory Settings in Bold)
OP:10
OP:11
OP:12
OP:13
OP:14
OP:20
OP:21
OP:30
OP:31
OP:40
OP:41
OP:42
OP:43
OP:50
OP:51
OP:60
OP:61
OP:70
OP:71
OP:80
OP:81
OP:90
OP:91
OP:00
OP:01
OP:02
OP:03
3 long beeps for 3 seconds
1 short, 1 long beeps for 3 seconds
3 sceond beep
3 quick beeps for 3 seconds
5 quick beeps for 3 seconds
Repeat feature not allowed
Repeat feature allowed
Prevents beep when a pad is pressed.
Allows beep when a pad is pressed.
Keypad time entry window is 1 minute.
Keypad time entry window is 2 minutes.
Keypad time entry window is 3 minutes.
Keypad time entry window is 4 minutes.
On-the-fly disabled
On-the-fly enabled
Opening oven door does not reset oven back to ready.
Opening oven door resets the oven back to ready mode.
Allows 60 minute maximum cooking time.
Allows 10 minute maximum cooking time.
Manual cooking not allowed.
Manual cooking allowed.
Single digit entry allows 10 preprogrammed pads. (0~9)
Multiple digit entry allows 200 preprogrammed pads. (0~199)
Oven will not display clean filter message.
Oven will display clean filter message every 7 days.
Oven will display Clean Filter message every 30 days.
Oven will display Clean Filter message every 90 days.
