DISASSEMBLY AND ASSEMBLY
(1) Remove the gasket door from door plate.
(2) Remove a screw which secure the door plate and door frame.
(3) Remove the door frame from door plate.
(4) Remove the stopper hinge top from door plate.
(5) Remove the spring and the hook.
(6) Remove the supporter barrier screen outer from door frame.
(7) Remove the barrier screen outer from door frame.
(8) Remove the decorator door from door frame.
(9) Reverse the above steps for reassembly.
4. Method to reduce the gap between the door seal and the oven front surface.
(1) To reduce gap located on part A.
Loosen a screw on stopper hinge top, and then push the door to
contact the door seal to oven front surface.
Tighten a screw.
(2) To reduce gap located on part B.
Loosen two screws on stopper hinge under, and then push
the door to contact the door seal to oven front surface.
Tighten two screws.
A sm all gap m ay be acceptable if the m icrow ave leakage does not exceed 4m W /cm
2
.
NOTE
