E-24
Guide for other useful programs
(cont.)
NOTE
• Do not use the detergent and softener.
• Cold water tap should be opened.
• After finishing this program,
is showed on PCB board alternately and the smoothing creases
program is conducted during 30 minute and then power is OFF.
• 'DELICATE', 'Quick 20', 'Tub Clean' and 'Drain' program are not selected with 'DRY'.
• Be careful the high temperature of laundry when put out clothes.
• A little shrikage and deformation will be possibly happened after drying, so check clothes whether dry or not
previously
• If the dry performance is poor, change the selecting temperature.
• If youn want to dry with wash, after selecting program, press the 'DRY' button then press 'Start/Pause' button.
1
Put the laundry into the Drum and close the Door.
2
Press the Power button.
• The LED shows only ‘- --' signal.
3
Select the ‘DRY CONDITION' you want by pressing ‘DRY' button.
As this button is pressed, the dry condition is selected by ‘Cupboard'
→
‘Very'
→
‘Time(1:00, 2:00, 3:00, 4:00)'
→
OFF
→
‘Low Temp'
→
‘Iron'
→
‘Cupboard'
4
Press the ‘Start/Pause' button.
• The washer will be operated with locking Door.
* DRY (FOR DWC-LD141X)
