DAEWOO ELECTRONICS DSL-19M1WCD, Руководство по обслуживанию, Страница: 42 / 81

41
134 CAS# output DRAM column address strobe, active low
133 RWE# output DRAM Write enable, active low
132 DQM1
Input
Data mask 1
130 IO_18 (DQS1)
Input Non-pull
GPIO
129 RD8
Input
DRAM data 8
128 RD9 Input DRAM data 9
127 RD10
Input
DRAM data 10
126 RD11
Input
DRAM data 11
125 RD12
Input
DRAM data 12
124 RD13
Input
DRAM data 13
123 RD14
Input
DRAM data 14
122 RD15
Input
DRAM data 15
121 RD0
Input
DRAM data 0
120 RD1
Input
DRAM data 1
119 RD2
Input
DRAM data 2
117 RD3
Input
DRAM data 3
116 RD4
Input
DRAM data 4
115 RD5
Input
DRAM data 5
114 RD6
Input
DRAM data 6
113 RD7
Input
DRAM data 7
112 IO_19 (DQS0)
Input
Non-pull
GPIO
111 DQM0
Input
Data mask 0
JTAG Interface( 4 )
51 TDI V_ADIN4 Input Non-pull
1)
2)
3) Serial interface port 3 data-out
Version AD input port 4
GPIO
52 TMS V_ADIN5 Input Non-pull
1)
2)
3) Serial interface port 3 data-in
Version AD input port 5
GPIO
53 TCK V_ADIN6 Input Non-pull
1)
2)
3) Serial interface port 3 clock pin
Version AD input port 6
GPIO
54 TDO V_ADIN7 Input Non-pull
1)
2)
3) Serial interface port 3 chip-select
Version AD input port 7
GPO
Note:
1. The Main column is the main function, Alt. Means alternative function.
2. The multi-function GPIO pins are set to green characters.
3. The video input port and external TV encoder mode can not both use CCIR-601 mode, at
least one of them should be in CCIR-656 mode.
4. Following is a summary of modified pins.
(a) Pin 48, 49, 50, 51 are no longer for JTAG functions.
(b) V_ADIN0 and V_ADIN3 is not available.