manualshive.com logo in svg

DAEWOO ELECTRONICS 719B, Руководство по обслуживанию, Страница: 17 / 52

Поделиться
Скачать
DAEWOO ELECTRONICS 719B Скачать руководство пользователя страница 17

◆  

Standard Adjustment Conditions

1. Power source voltage : AC 120V, 60Hz/AC 220V, 50Hz.

2. Aging : Take at least 20 minutes warm-up time.

3. Signals.

Video : Analog 0.7Vpp 75

Ω

terminal positive polarity

Synchronizing : TTL Level Negative/Positive Separate/Composite
Deflection frequency

Horizontal Frequency : 30KHz - 70KHz
Vertical Frequency : 50Hz - 160Hz

◆  

Pre-Adjustment

1. High Voltage Adjustment

Adjust 26K Vdc between Anode cap and ground at a cross hatch pattern of 60KHz by using VR 502.

◆  

Method to launch the factory mode

Step 1. Push the menu button.

Step 2. Push the menu button and Brightness minus control button (      )  for 5 times in same time.

◆  

Main Adjustment

1. Setting the Controls

Set the value of items as following.

Contrast : Max. (OSD value up to 100)
Brightness : Center (Set the OSD value to 50)

2. H.size, V.size, H.phase, V.position, Pincushion, Trapezoid

Receive the cross hatch pattern of Factory preset mode.
H.size, V.size, H.phase, V.position, Pincushion, Trapezoid are adjusted at each mode.
In Factory, Auto Alignment was done at each mode. Therefore, Factory preset mode has it’s own value
according to each control.

3. Focus

(a) Set brightness control to center and contrast control to MAX.
(b) Receive all “H” character pattern of 60KHz mode signal.
(c) Adjust the Focus control of FBT to obtain best Focus (static focus and Dynamic focus).

4. Geometric Distortion Adjustment

(a) Receive the cross hatch pattern of VGA mode signal by using the signal generator.
(b) Pin balance, Parallelogram are adjusted the best geometric status.
(c) Repeat the adjustment at each mode.

5. White Balance Adjustment

(a) Receive a full white pattern of 60KHz mode.
(b) Set the bright control and contrast control to the maximum and receive the all black pattern.
(c) Select a Temperature function on the R, G, B item of the OSD menu and select 9300.
(d) If the screen luminosity is changed, adjust the sub brightness control to get the 0.6 ~ 0.8 Ft/L screen

luminosity.

(e) Select the R, G, B Bias on the OSD menu and adjust the       /      key to get the color coordinates in

X=0.281, Y=0.311.

(f) Set the brightness control to the center and contrast control to the maximum.
(g) Receive a full white pattern.

15

ALIGNMENT PROCEDURE

All manuals and user guides at all-guides.com

Содержание 719B





















































Отзывы:

Нет отзывов