Instructions for use
1. Insert the mains plug into the socket.
2. Turn the Temperature Control to the desired temperature.
3. Set the Timer to 3 minutes to pre-heat the Air Fryer.
4. When the yellow indicator light goes out, carefully remove the Frying
Drawer and place the food into the Frying Basket.
5. Set the Timer to the desired time.
6. When the cooking time is over, a bell will sound. After removing the Frying
Drawer place it on a heat proof surface.
Note:
For better cooking results, turn over the food by shaking the basket
during the cooking process.
CAUTION:
Do not pull the fryer drawer out during the cooking process,
always set the timer and temperature control to zero before removing the
drawer.
Cleaning and Maintenance.
Always unplug the Air Fryer from the mains supply and allow to fully cool
before cleaning.
Do not clean any part of the air fryer in a dishwasher.
Do not submerge any part of the main body, mains cable or plug in water
or any other liquids.
Wipe excess oil from the basket and drawer with kitchen roll or similar.
Wipe clean the main body of the Air Fryer with a damp cloth.
The basket ad drawer can be washed in warm soapy water.(rinse and dry
thoroughly before using again)
Never clean any part of the Air Fryer with harsh or abrasive cleaners.
Electrical Connections
This appliance is fitted with a fused three-pin plug to BS 1363. If the plug
has to be removed, it should be cut off and carefully disposed of
immediately. To avoid a possible shock hazard, do not insert the discarded
plug into a mains socket.
