5
TWS Bluetooth Speakers
AVS1406, AVS1431 & AVS1432
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Charging the internal Battery
Before use, please ensure that the internal rechargeable batteries are fully charged as follows
:
1.
Insert the
Micro USB Plug
(11) of the
USB Charging Cable
(10) into the
Micro USB DC
Port
(9) on rear panel of the Speaker to charge the internal battery.
2.
Insert the large USB plug on the other end of the
USB Charging Cable
(10) into a suitable
USB charger rated at 5 volts 1 amp minimum.
3.
The LED Indicator
(5) will light red to show the internal battery is charging. Once the
battery is fully charged, the
LED Indicator
(5) will go out showing that the internal battery
is fully charged and the
USB Charging Cable
(10) can be removed.
NB
the Speaker can be used normally during charging.
Operating Instructions
Using the Bluetooth Mode
1.
Press and hold the Power button (1) on the front Panel for three seconds to power up
the speaker.
2.
The LED Indicator (5) will quickly flash blue.
3.
Enable the Bluetooth mode on your Phone, Tablet or other Bluetooth compatible device
and set it to search.
4.
Select ‘
AVS1406
’ from the search results found by your device which will now pair with
the speaker. Once the device has paired with the speaker the LED Indicator (5) will light
steady blue and the speaker will chime.
5.
Enable the music player on your Phone, Tablet or other device you are using.
6.
Press the
Play/Pause/Phone
button (4) to start and stop (pause) the connected device
playing.
7.
Use the Skip Back
▬
(2) and Skip F buttons (3) to change the track being played.
8.
Press and hold the Skip Back
▬
(2) and Skip F buttons (3) to decrease and
increase the volume level.
9.
Alternatively use your devices controls in the usual manner.
NB
the
LED Indicator
(5) will flash slowly whist music is playing.
Using the AUX/LINE Input
The AUX/LINE Input allows a direct wired connection of an external audio device (such as a
mobile phone, music player, etc.) via a 3.5mm jack socket input on the rear Panel.
1.
Press and hold the Power button (1) on the front Panel for three seconds to power up
the speaker.
2.
Insert a
3.5mm jack to jack lead
(12) into the
AUX
socket (7) on the rear panel of the
Speaker.
3.
The speaker will automatically detect the lead and switch to AUX mode.
4.
Insert the other end of the lead into the device you are playing from.
5.
Press and hold the Skip Back
▬
(2) and Skip F buttons (3) to decrease and
increase the volume level.
Playing Music from a USB Memory Stick
1.
Press and hold the Power button (1) on the front Panel for three seconds to power up
the speaker.
2.
Insert a USB Memory Stick (pre-loaded with audio tracks
–
Mp3, WAV, files etc.) into the
USB memory stick port
(8) on the rear panel.
NB
the USB port supports USB 2.0 and up
to 32GB capacity max.
3.
The tracks on the memory stick will begin to play automatically.
