9
Using the Bluetooth Mode
1.
Repeatedly press the
FUNCTION
button (7) to select the Bluetooth
mode; “
bt
” will be show
n on the
LED Display
(3).
2.
Enable the Bluetooth mode on your Phone, Tablet or other Bluetooth enabled device and set it to
search.
3.
Select ‘
AVS1301
’
from the search results found by your device. Once the device has paired with the
Karaoke Machine a chime will be heard and the PAIR LED next to the
PAIR/PLAY/PAUSE
button (16)
will light up continuously.
4.
Press the
PAIR/PLAY/PAUSE
button (16) to start and stop the connected device playing.
5.
Adjust the volume to the desire level using the
MASTER VOL
control (15).
6.
Alternatively use your devices controls in the usual manner.
NB
Use the
PAIR/PLAY/PAUSE
button (16) to pair or unpair a Bluetooth connected device.
Using the Auxiliary Input Mode
The Auxiliary Input allows a direct wired connection of an external audio signal source.
1.
Insert a suitable 3.5mm jack lead (not supplied) into the
3.5mm AUX IN Jack Socket
(19) on the front
of the unit.
2.
Repeatedly press the
FUNCTION
button (7) to select the AUX mode;
“Aux”
will be shown on the
LED
display
(3).
3.
Adjust the volume to the desire level using the
MASTER VOL
control (15).
4.
Use your devices controls in the usual manner.
Using the Programming Function
1.
While in the STOP mode (i.e. a CD or USB stick in the machine but not playing), press the
PROG/REPEAT
button (8); the
PROGRAM
indicator (28
) will blink and ”P01” will
then show on the
LED Display
(3) indicating the first track is ready to program.
2.
Select the first track by using the
Skip -/+
buttons (17).
3.
Press the
PROG/REPEAT
button (8) again to confirm the entry.
4.
Repeat the above to set up to 20 tracks into memory. When done, press the
PAIR/PLAY/PAUSE
button (16) to start the selected tracks playback.
Notes on the Programming Function
•
Press the
STOP
button (11) TWICE or switch off at the
POWER on/off
button (6) to stop and clear the
program tracks.
•
If more than 20 tracks are attempted to be
programmed, “
FUL
” will appear in the
LED display
(3).
•
The programming function is available in CD and USB mode.
LED Decorative ‘Disco’ Lights
(22)
Press the
LED Decorative ‘Disco’ Lights
button (4) to select one of the three light modes on the front of
the unit as follows:
•
Light Mode 1
: The unit will synchronize to the music being played and Karaoke vocals.
•
Light Mode 2
: The unit will light up with random colours and patterns.
•
Light Mode 3:
The light effect will be turned off.
Care and Use of your Karaoke Machine
•
Always disconnect the Karaoke Machine from the mains power supply before cleaning.
•
Clean outside of the Karaoke Machine with a clean, soft dry cloth. Never clean with harsh or abrasive
cleaners.
•
Do not clean with furniture wax or polish sprays.
•
Do not submerge the Karaoke Machine or its Power Supply in water or any other liquids.
