daewon DIB-N800 Series, Руководство пользователя

Страница: 12 / 20

22 23
Operations
Energy saving
Select the Energy saving button once to initiate the Energy
saving mode 1. Select it again to initiate the Energy saving
mode 2. To cancel the Energy saving mode, select it once
again after the Energy saving mode 2.
No energy saving (off) → Energy saving mode 1 (green)
→ Energy saving mode 2 (red)
Energy saving mode 1 (regular saving)
Seat temperature is lowered as below and goes back to
the previous set temperature automatically as soon as the
seat is occupied.
- Low temperature (34°C/93°F) → (28°C/82°F)
- Medium temperature (37°C/99°F) → (30°C/86°F)
- High temperature (40°C/104°F) → (32°C/90°F)
Energy saving mode 2 (powerful saving)
Seat heating is turned off regardless of the current temperature setting and goes back
to the previous set temperature automatically as soon as the seat is occupied. After a
seat is unoccupied, it returns to Energy-saving mode.
The night light dims during the Energy saving mode 2 and when a user sits on the
seat, it becomes bright and dims back after leaving the seat.
Operations
There are two ways to initiate nozzle cleaning.
Nozzle cleaning
Nozzle cleaning 1 (nozzle body care)
Select Nozzle cleaning for a second while not seated.
Nozzle extends toward and self-clean 3 times with cold
water. It retracts when finished. Pressing Stop at any time
to cancel the nozzle cleaning process.
Nozzle cleaning 2 (Nozzle tip intensive care)
Select and hold the Nozzle cleaning button for 3 seconds
while not seated. Nozzle extends toward and nozzle tip will
be self-cleaned for 40 seconds with hot water.
It stays extracted for user’s manual cleaning for 5 minutes
and retracts automatically.
Select the Nozzle cleaning button again to retract the
nozzle if the cleaning process is finished earlier.
Select the Nozzle cleaning button while the nozzle tip
is being self-cleaned, and self cleaning is canceled and
extracts promptly for user’s manual cleaning.
You can program your preferred settings for two users.
Follow the steps below to program and use the memory
function.
Water temperature, seat temperature, water pressure,
nozzle position, and dry temperature can be stored.
Use the bidet seat with your preferred settings first and
select and hold one of the user preset buttons for 3 seconds.
Settings will be saved with 1 beep.
Settings can be overwritten on the current presets. In this
case, old settings are deleted and new settings are saved.
Select the user preset 1. 2 LEDs(green/red) of Energy saving
light on and only green LED blinks once altering you that
user memory 1 is activated.
Select the user preset 2. 2 LEDs(green/red) of Energy saving
light on and only green LED blinks twice altering you that
user memory 2 is activated.
User preset
To reset the bidet seat back to its factory default
settings, select the stop button 4 times within 2 seconds
to clear all current settings.
A factory reset can only be performed when the seat is
not occupied.
A tone will be heard to confirm that the bidet seat has
been initialized.
Factory default reset
Multicolored night light
Select a nozzle cleaning button repeatedly to change
the color of the night light 1 of 7 colors while the seat is
occupied.
The default color is white and can be changed in the
following order.
Pure white
→ Sky blue → Pretty yellow → Princess pink
→ Hot red → Sea blue → Forest green → Off
The night light dims during the Energy saving mode 2
and when a user sits on the seat, it becomes bright and
dims back after leaving the seat.
Sleep mode
Select and hold Energy-saving for 3 seconds to enter Sleep
mode regardless of the seat sensor occupation. Select
Energy-saving again for a second to cancel the sleep
mode.
4 times!
3 seconds
3 seconds
3 seconds