DAELIM S3, Руководство по обслуживанию

Страница: 20 / 20

• Insert the lock of the coupler until the lock is fully
secured.
•
Turn off the main switch before connecting/dis-con-
necting.
•
Release the lock to disconnect the lock of the coupler.
•
The lock of the coupler has two types according to
releasing method(press type and pull type) so release it
properly according to the shape.
- Typical releasing method of the coupler is illustrated in
the following.
•
When disconnecting the coupler, disconnect it while
holding the coupler body. Pull while holding the wire
harness cord and do not remove the coupler connection.
•
Release the lock by inserting the coupler slightly and
then narrowing connection to remove the coupler.
•
Pay attention not to damage the vinyl cover of the cou-
pler.
•
Check to see if there is bended terminal and secure it to
avoid disconnecting.
•
If the wire harness coating is damaged, repair by wind-
ing vinyl tape or replace it.
•
Prior to connecting the connector, make sure that the
cover is not damaged and the mess terminal is not
opened.
SERVICE INFORMATION