DAELIM Q2, Руководство пользователя

Страница: 42 / 92

40
Turn off the main switch to see if the fuse
is severed. If the fuse is severed, exchange
the fuse into a fuse with same
capacity.(15A)
●
Fuse is installed in fuse holder around
the battery.
●
To change a fuse, first take off fuse
holder. Then, remove the disconnected
fuse, and insert the reserved fuse with
same capacity.
●
If the fuse immediately becomes severed after
being changed with the new one, check another
problem of the electric system. Contact to the
designated service shop.
(Out of order in the charging system, the wires
being taken off, bad connection of connector)
FUSE REPLACEMENT
FUSE BOX
BATTERY
Press and assemble
from the upside
Disassemble by pulling
out from the upside
DISASSEMBLY ASSEMBLY
FUSE A
30A
CHARGING, COMBI. S/W,
REGULATOR
FUSE B
15A
WINKER RELAY, METER
LIGHTING, HORN HEAD LIGHT (HI
/ LOW), FR/RR. STOP SWITCH,
TAIL LIGHT, FUEL METER
FUSE C
15A
IGNITION COIL, ECU, OXYGEN
SENSOR
FUSE D
15A
ECU, FUEL PUMP RELAY
FUSE E
15A
FAN MOTOR
CAUTION
●
When using the battery without cover,
(+), (-) terminals may be connected to
cause short circuit resulting in fire.
When handling the battery, stay away
from flammable materials.
●
Your battery is a maintenance-free type
so check or refilling of electrolyte will
not be required. If there is any
abnormal, contact to Daelim service
center.
●
If you reform the battery for car, battery
will be improperly installed to cause
short circuit resulting in fire.
●
If the electrolyte gets into your eyes or
on skin, it’ll cause a serious injury.
●
Do not discard the battery other than
specified place. It will bring
environmental contamination, and be
brought under the law