DAELIM NS125DLX, Руководство по обслуживанию, Страница: 143 / 191

Brake System
14. Brake System
14-1
Service Information 14-1
Troubleshooting 14-1
Brake Fluid/Bleeding 14-2
Brake Pad 14-3
Brake Disk 14-6
Brake Caliper 14-6
Master Cylinder 14-9
Service Information
General Safety
●
Do not allow foreign material to enter the system when replenishing brake fluid.
●
To prevent chemical changes, do not mix different types of brake fluid.
●
Do not use the old brake fluid again.
●
Brake fluid can cause damage to painted, plastic, and rubber surfaces. Take precautions not to allow parts
to be contaminated by the brake fluid.
●
Do not reuse sealing washers.
●
Clean the disassembled parts with brake fluid, and check for any clogged passage with compressed air.
●
Bleed the brake hose after removing it.
Troubleshooting
Braking power unsatisfactory
●
Air in the brake system
●
Moisture in brake fluid
●
Brake pad and disk contaminated
●
Caliper piston seal worn
●
Master cylinder piston seal worn
●
Brake pad worn
●
Caliper inside contaminated
●
Unsatisfactory caliper sliding part operation
●
Lopsided wear of brake pad and disk
●
Low brake fluid level
●
Clogged brake fluid line
●
Disk bent or distorted
●
Caliper piston seized or worn
●
Master cylinder piston seized or worn
●
Disk worn
●
Master cylinder inside contaminated
●
Brake lever bent
Hard brake lever movement or
unsatisfactory return
●
Brake system clogged
●
Caliper piston seized or worn
●
Unsatisfactory caliper sliding part operation
●
Brake fluid line clogged
●
Caliper piston seal worn
●
Master cylinder piston seized or worn
●
Brake lever bent
Brake drag
●
Brake pad and disk contaminated
●
Improper wheel alignment
●
Lopsided wear of brake pad and disk
●
Disk bent or distorted
●
Unsatisfactory caliper sliding part operation
●
Hydraulic system contaminated with dust.
14