DAELIM DELFINO, Руководство пользователя

Страница: 46 / 62

44
●
Make sure to stop the engine prior to
car washing.
● Be careful not to allow water to enter
the muffler during the washing.Water
inside the muffler may cause an
improper engine starting or rust
occurrence.
● Do not let water get inside the braking
system during the washing, as water
inside the brake system may weaken the
braking power. Upon completion of
washing, select a safe place where there
is no traffic obstruction, and start the
vehicle.
Lightly apply the brake while driving at
a slow speed and check the braking
power. If the braking power has been
weak-ened, apply brake lightly while
driving at a slow speed to dry up the
brake system.
●
Take precautions when waxing the
vehicle. Excessive polish of the painted
section and/or the resin part with
compound wax might damage the
painted section causing discoloration of
the affected area.
●
To preserve the finish of metal parts and
paintwork, wash and clean your motorcycle
at regular intervals, anyway according to the
road conditions you ride in.
●
Especially during winter period through road
salt a continuous cleaning of the vehicle is
necessary so that remove the road salt. Use
specific products only.
●
Avoid aggressive detergents or solents
<IMPORTANT>
●
Do not wash your motorcycle right after
use.When the motorcycle is still hot,
water drops will evaporate faster and
spot hot surfaces.
●
●
●
The frame number is stamped on the
front central part of the frame.
● The engine number is stamped on the
lower part of the left crankcase.
●
The frame and engine numbers will be
used as the basis of recovering the
vehicle when is stolen.
● Record the frame and engine numbers
along with the vehicle license plate
numbers and keep them separately from
the vehicle.
<FRAME NUMBER>
<ENGINE NUMBER>
CLEANING GENERAL CLEANING
Do not use high pressure water jets.
Never aim the nozzle direct at wheel
bearings, front fork seals, electric items,
air inlets or exhaust pipe ends.
Clean off stubborn dirt or exceeding
grease from engine parts using a
degreasing agent.
Be sure to avoid contact with drive
parts (chain, sprockets, etc)
Rinse with warm water and dry all
surfaces with chamois leather.
FRAME AND ENGINE NUMBER
FRAME
NUMBER
ENGINE NUMBER