User Guide
1
PHYSICAL
ELECTRICAL
SPECIFICATIONS
Use precautions to avoid damages to the product or injuries of users. Any actions against following contents will cause serious
issues such as malfunction, electric shock, or burn.
USE DC24V ONLY
DO NOT USE AC INPUT
AC INPUT
Do not cut or rejoion wires while product
is connected wth live power source
Maximum driver quantity per serial
connection is limited. Failure causes overload
of current and damages to the product
Refer to ‘WIRE THICKNESS’ table to use proper
wire thickness between SMPS and the first
LED module
Failure will cause dimmed output
Cable length between SMPS and the first LED
module is limited. Refer to ‘CONNECTION
WITH POWER SUPPLY’ on page 2
Do not use the product under circumstances
listed below
- High temperature spots over 60˚C (140˚F)
- Spots draw extreme moisture or dust
- Spots have corrosive gas or highly effectied
by electromagnetic field
Avoid performing installation under rain or
high humidity for outdoor use
Do not perform actions listed below
- Alter or modify
- Touch LED lamps with sharp objects
- Put glue or silicon over the LED lamps
PRECAUTIONS
BAR S Series
Model
Length
Width
Thickness
Weight
LED Lamp Pitch
Epoxy Molding
IP65
Electronic dimming control supported
Model
BAR S 960
BAR S 480
BAR S 240
BAR S 120
Current Dissipation
400mA
200mA
100mA
50mA
Power Dissipation
9.6W
4.8W
2.4W
1.2W
Operating Power
DC24V
DC24V
DC24V
DC24V
Max Serial Connection
5.0 Meters
5.0 Meters
5.0 Meters
5.0 Meters
BAR S960
BAR S480
BAR S240
BAR S120
960mm
480mm
240mm
120mm
21mm
21mm
21mm
21mm
9.5mm
9.5mm
9.5mm
9.5mm
224g
106g
56g
26g
20mm
20mm
20mm
20mm
DAEHANTRANS CO.,LTD
#7-11 Songdo-Dong, Yeonsu-Gu, Incheon, Korea
Tel. +82 32 858 0491 Fax. +82 32 832 8421 [email protected] / www.daehantrans.com
