6
1
7
2
8
4
5
3
TC2SP01A
1. Packing List
2. generaL safety information
3. exPLoded view
4. instaLLation instrUction
d.d kit#. t2131-55452
Printed in Korea. FEB. 2018
3. exPLoded view
(1) ASSY,STEREO
(2) ANTENNA ASSY
(3) ASSY,SPKER
(4) SPRING_WASHER
(5) PLAIN_WASHER
(6) SCREW_WITH_WASHER
(7) CROSS-RECESSED HEAD MACHINE SCREW
(8) NUT
4. instaLLation instrUction
1. Park the vehicle on
fi
rm and level ground. Then, engage the parking brake and stop
the engine.
2. Unscrew 6 roof mounting bolts (A) to
remove the roof.
no.
Part no.
description
Q'ty
remark
1
TG15-0046A
ASSY,STEREO
1
2
T4810-82421
ANTENNA ASSY
1
3
T4810-82341
ASSY, SPEAKER
2
4
04512-50060
SPRING_WASHER
1
5
04013-50060
PLAIN_WASHER
2
6
03024-50420
SCREW_WITH_WASHER
2
7
03014-50625
CROSS-RECESSED HEAD MACHINE SCREW
1
8
02114-50060
NUT
1
9
T5270-55172
STEREO ACCESSORIES(MANUAL)
1
1. Packing List
2. generaL safety information
this symbol means attention! yoUr satety is invoLved.
the message that follows the symbol contains important information
about satety. carefully read the message.
Before servicing and rePairing
1. Read all safety instruction in this
manual and be aware of safety decal
locations on your machine.
2. Thoroughly clean your work area and
the machine.
3. Make sure the machine is on firm
and level ground and that the parking
brake is set.
4. Lower the implement to the ground.
5. Stop the engine and remove the key.
6. Disconnect the negative battery cable.
7. Place a "DO NOT OPERATE" tag in
the operator station.
working safety
1. Do not operate or service the machine
while under the influence of alcohol,
medications, or other sustances.
2. Never wear loose fitting clothing and
always use safety equipment appro-
priate to the job.
3. Never use improvised tools, parts or
procedures. Use only recommended
tools appropriate to the work.
4. Extra care should be taken to work
safely when servicing is done by two
or more persons.
5. Always support the machine with safe-
ty stands rated for the weight of the
machine. Never work under a machine
that is supported solely with a jack.
6. Do not touch any rotating or hot parts
while the engine is running.
7. Escaping fluid (hydraulic oil) under pres-
sure can penetrate the skin causing seri-
ous injury. Relieve pressure before dis-
connecting hydraulic or fuel lines. Tighten
all connections before applying pressure.
disPose of fLUids ProPerLy
1. Observe relevant environmental protec-
tion regulations when disposing of oil.
NEVER pour fluids onto the ground,
down a drain, or into any body of water.
A
TC2SU02A
instaLLation
instrUctions
for for ck3510(H)/4010(H)
smv stereo kit
Next page
▼
3. Attach the antenna assembly (2) to
the removed roof with Phillips screws
(7).
TC2SU03A
service sUPPort division / daedong indUstriaL co.,Ltd.
35, Nongongjungang-ro 34-gil Nongong-eup, Dalseong-gun, Daegu, KOREA 42984
Tel:82-53-610-3350 Fax:82-53-610-3359
http://www.daedong.co.kr
kioti tractor division / daedong-Usa, inc.
6300 Kioti Dr. Wendell, NC 27591
Toll Free:
1877-go-kioti
Tel:1-919-374-5100 Fax:1-919-374-5001
http://www.kioti.com
daedong kioti eUroPe B.v
Koerilenstraat 2, 3199LR, Maasvlakte-Rotterdam The Netherlands
Tel:+31 (0)181 35 30 25
http://www.kioti.eu
