Daedong KIOTI DK4510 Скачать руководство пользователя

Страница: 102 / 188

dk4510 / dk5010 / dk5510

CAUTION

To avoid accidents:

fix the mounting bolts firmly

and secure the frame with the

knock bolt.

•

HOW TO RAISE THE ROPS TO UPRIGHT POSITION

1. Unscrew the mounting bolts.
2. Set the

ROPS

in the upright posi-

tion.

3. Align the bolt holes and fit the

mounting bolts to them.

4. Tighten the knock bolt and fix it

with the nut.

td2O514A

(1) Mounting Bolt

ImPORTANT

ROPS (Roll Over Protective

Structure), sun canopy are not

a fOPS (falling Object Protec-

tive Structure). It never can

protect the riders against fall-

ing objects. Avoid driving the

vehicle into a dangerous area

such as falling rocks zone.

Otherwise, it may lead to a se-

rious injury.

•

CAUTION

To avoid accidents:

make sure to set the ROPS up-

right and fasten the seat belt

during work. If it is necessary

to work with ROPS folded, do

not fasten the seat belt. fas-

tening seat belt with folded

ROPS can be dangerous in

case of tractor rollover.

•

TD200(DK4510,5010,5510-SA)-동남아향-14 14

2017-02-07 오전 9:37:19

Содержание KIOTI DK4510





























































































































































































Результаты поиска

Содержание KIOTI DK4510

Отзывы:

Похожие инструкции для KIOTI DK4510

Бренды по названию

Популярные бренды

Daedong KIOTI DK4510, Руководство пользователя

Результаты поиска

Содержание KIOTI DK4510

Отзывы:

Похожие инструкции для KIOTI DK4510

Бренды по названию

Популярные бренды