1.
Ensure that the
drain pipe in the
floor is thoroughly
cleaned before the
bath is placed into
position and that
the waste hole is
positioned
correctly.
2.
Before the bath is
fixed to the floor
ensure that the
bath waste and the
drainage pipe line
up.
3.
Make sure all
surfaces are dry
and stable before
installing the
bathtub. This will
ensure durable
adhesion.
4.
Mark an area with
tape on the floor
where the bathtub
is going to stand
with the template
provided, the floor
can now be
properly prepared.
5.
Position the bathtub and
connect the waste, use a spirit
level to ensure that the
bathtub is perfectly level. Fill
the bathtub with water, let the
water run through the waste
and check for leaks. Apply a
bead of silicone around the
base of the bathtub.
Freestanding Bathtub
sku# 10DW103
Technical Specifications
G R A C E LY N N
m a d e f r o m
D A D O q u a r t z
Installation Instructions
Overflow : internal slotted included.
Tap/Faucet holes : none
Toe-tap Drain not included.
Waste diameter : 1.97 in (50mm)
Base dimensions : 35.2 x 16.9 in
(895 x 430 mm)
Overall dimensions : 69.9 x 30.9 x 23.8 in
(1775 x 785 x 605 mm)
Weight : 209 lbs (95 kg)
Water capacity : 87 gallons (330 L)
Note : Allow a 5% variance on all measurements,
