Before installation, please open the packing box first, check the packed components according to the packing list,
and turn off the power supply of the machine tool at the beginning of installation to avoid danger.
INSTALL
WARNING
1、Installation direction
The installation direction of the light emitting device and the light receiving device should be consistent.
Emitter
Receiver
Emitter
Receiver
2、Reflection from the ground and walls
When installing it as below, the light reflected from the surface of wall and flat is not shaded. Please check whether
it operates normally or not with a sensing target before using. (interval distance: ≥ 0.5 m)
Emitter
Receiver
Emitter
Receiver
Sensing target
Reflecting light
Reflecting light
Sensing target
Floor
Wall
3、For protection of interference
It may cause interference when installing more than 2 sets of the sensor. In order to avoid the interference of
the sensor, please install as following figures and use the transmitted light frequency changing function.
DONGGUAN DADI ELECTRONIC TECHNOLOGY CO., LTD
We rese e the right to make technical changes
2023
-
05
-
29
12
Website:
Email:
www.dadisick.com
sale
@
dadisick
.
com
•
Transmission direction should be opposite between 2 sets.
Emitter 1
Receiver 1
Emitter 2
Receiver 2
Emitter 2
Receiver 2
Emitter 1
Receiver 1
Cable
Cable
Cable
Cable
SAFETY LIGHT CURTAIN USER'S MANUAL
