Dadant Fill Master
A. Power Switch -
Turns the entire unit “on” and “off”. The filler can always be stopped from filling by turning
this switch “off”.
B. Fill Speed Control -
The filling rate is controlled with this rotary dial. For example, a slower rate is desired
to fill smaller containers to minimize turbulence in the container when filling. Clockwise rotation increases
rate of fill.
C. Fill Quantity Counter -
By setting this newest generation, LC/Digital counter, you determine the fill quantity
of your container. Look at the counter and note the display. This is programmed using four push buttons. By
entering a “fill number” in this counter, you set the fill quantity. More on how to set this is in section II entitled
“To Determine and Set Fill Level”.
D. Mode Switch -
This 2-position switch allows you to select two methods of operation.
1.The pedal (left position):
With the Time Interval Dial “Off”one fill is given each time the foot pedal is pressed
(multiple presses on the foot pedal will not trigger multiple fills.
2.
Auto
(right position) is full automatic cycling with the time between fills set with the rotary
“Time Interval” dial. The Time Interval must be “on” for auto cycling to function.
Note: When operating in “Auto” mode, our recommendation is to remove the foot pedal
plug from the socket to prevent unwanted fills.
E. Time Interval -
When “on”, this dial sets the time interval between fills when using the “Auto”
mode. Clockwise rotation decreases time interval between fills.
F. Manual Fill -
This switch provides filling whenever it is activated and the power switch is
“on”. To fill manually (without counter) push in the button as long as desired to obtain fill.
G. Foot Pedal Socket Connection
Your Fill Master Filler:
It is best to become familiar with your new filler before filling containers with it. Look at the
face panel and become acquainted with each control’s location and function and operation by the
descriptions below. Then move on to the practice section.
