11
EN
DXZ48
3.8 . Phase Inversion
Turn the rotary encoder to switch phase inversion on or off.
3.9 . Channel Link
By linking 2 channels, the settings are guaranteed to be identical for both channels, except for mixer and
mute. Turn the encoder to set the Channel Link on or off.
4 .
System Menu
Push the Menu button to enter the system menu. Push the Menu button again to toggle through the
menu items. The available menu items are:
4.1 . Load Preset
Turn the rotary encoder to select the preset you wish to load. Push the rotary encoder to select it, then
turn it again to select “YES” and confirm again by pushing the rotary encoder knob. The preset is loaded
and all settings are applied immediately. All settings that were in the unit prior to loading the preset will
be erased.
This action can not be undone.
The presets contain all filter, dynamics, gain settings etc; in other words, everything that makes out a loud-
speaker configuration. Presets do NOT contain the name of the unit, network configuration, automatic
standby delay, user access rights and passwords.
4.2 . Save Preset
Turn the rotary encoder to select the location of the preset. If that location is not empty, the preset in that
location will be overwritten. This action can not be undone.
The system will ask you to give a name to the preset name. Select a character in the cursor position by
turning the rotary encoder; pushing the rotary encoder confirms the character selected and moves the
cursor to the next character to edit. Pushing the exit/ESC button erases the last confirmed character. Once
the name is set up, push the menu button again. If you want to continue storing the preset, select Yes by
turning the rotary encoder and confirm by pushing it. To cancel, push the exit button. Now your preset is
saved in the selected location.
The presets contain all filter, dynamics, gain settings etc; in other words, everything that makes out a loud-
speaker configuration. Presets do NOT contain the name of the unit, network configuration, automatic
standby delay, user access rights and passwords.
4.3 . Access Level
The DXZ48 has the option of locking away the front panel controls to avoid tampering of settings by un-
authorized persons. To lock the unit, select “Locked” by turning the rotary encoder, and push it to confirm.
The system will ask you to enter a password. Select a character in the cursor position by turning the rotary
