DACS LTD, Stonehills, Shields Road, PELAW, Gateshead, Tyne and Wear NE10 0HW
Tel: +44 (0) 191 4382500 | Fax: +44 (0) 191 4382511 | www.dacs-audio.com | [email protected]
8 Input Select switch
With up to four inputs connected to the unit, you can decide which headphone
amplifier output you wish to use. To select the input(s) you wish to listen to, rotate the
selector switch to the appropriate point: AB means inputs A and B on the Left and
Right output channel respectively;, AA means input A on both Left and Right, etc.
Plug your headphones in and adjust the volume to an acceptable level.
9 Input Meters
These tri colour LED meters indicate the level on the 4 busses feeding the
headphone amplifiers. They are calibrated as follows:
Green starts to glow at -24duB and is fully on at -8dBu to 0dBu
Orange starts at 0dBu and is fully on at +10dBu to +16dBu
Red starts at +16dBu and is fully on over +18dBu
For optimum performance operate HEADLITE 3 at 0dBu to +16dBu.
10 Power
This switches the power on and off, and is illuminated when AC mains is present. The
switch is connected before the fuse, so if the switch is illuminated and the unit does
not work, the fuse may be blown. The unit comes with a spare fuse in the fuse carrier
(T1A).
Clarity HEADLITE 3 is fitted with the ultra quiet regulated linear power supply as used
in the DACS Clarity MicAmp.
Содержание HEADLITE 3
Страница 1: ...USER GUIDE HEADLITE 3...