Dacor RNHP3012, Инструкция по использованию и уходу

Страница: 8 / 12

6
Care and Cleaning
Maintenance
Cleaning the Stainless Steel
Clean stainless steel surfaces with a mild solution of
dishwashing liquid and warm water.
ALWAYS WIPE
WITH THE GRAIN OF THE STEEL.
Do not use abrasive cleaners or abrasive cloths.
Rinse and dry with a micro-fiber cloth or other lint-
free cloth.
We recommend Dacor Stainless Steel Cleaner. Use it
according to the directions on the package
Replacing the Light Bulbs
Light bulb replacement is considered to be
homeowner maintenance. Before replacing any
bulbs, or if any light does not work, check to make
sure that the power is on at the circuit breaker, fuse
box, light swich, or the main power button (page 5).
If you are replacing the bulb outside of Dacor’s
service, please bring the bulb with you to avoid any
compatability problems.
SPECIFICATIONS :
LED Dimmable or Halogen
75W Max, 120V
PAR16, E26/27, 500 lumens
Replacing the Light Bulbs
1. Turn the power OFF at the circuit breaker or fuse
box. (This avoids damage if a short occurs.)
2. Gently push the suction cup tool A (provided
with your range hood) onto the lens of the light
bulb. B
Make sure the lens is grease-free
.
3. Turn the tool handle left to loosen the bulb.
4. Remove the tool and bulb.
5. Insert the replacement bulb inside the housing and
tighten. If the bulb remains loose:
6. Attach the suction cup to the lens of the replace-
ment bulb. C Make sure the lens is grease-free.
7. Tighten this new bulb into the housing. Twist right
until it is tight.
8. Remove the suction cup from the bulb.
9. Turn the power ON at the fuse box or circuit panel.
Replacement Parts
Order at www.everythingdacor.com
Dacor Part
Number
Description
702666 Dimmable LED Bulb Replacement Kit
(1 bulb + 1 suction cup tool)
702579 Baffle Filter Kit (1 pc + hardware)
702580 Baffle Filter Kit (2 pc + hardware)
Inserting the Bulb
C
Removing the Bulb
A
B
WARNING
• To prevent electric shock, turn power OFF at the fuse
box or circuit breaker panel before replacing the light
bulb.
• To avoid the risk of fire, do not use any light bulb
stronger than 75W, 120V
• To avoid personal injury, make sure the hood and the
light lens are cool before changing the light bulb.