background image

3

Installation Specifications

Product Dimensions

36”

(91.4 cm)

   

2

34” 

(86.4 cm)

1

19” 

(48.3 cm)

1

21”

(53.3 cm)

  

2

3/16” (4.8 mm)

Glass thickness:

3 7/8” 

(9.8 cm)

30”

(76.2 cm)

   

2

28”

(72.4 cm)

1

19”  

(48.3 cm)

1

21”

(53.3 cm)

2

3 7/8” 

(9.8 cm)

3/16” (4.8 mm)

Glass thickness:

 IMPORTANT

This appliance is provided with electrical connection 

leads in a flexible metal conduit. These leads may be a 

smaller gauge than the standard household wiring of the 

dedicated supply circuit, but they are suitable for connec-

tion to these circuits under the jurisdiction of the National 

Electric Code, and/or the local inspection authority.

• 

It is the owner’s responsibility to ensure that a licensed 

electrician performs the installation of the electrical sup-

ply for this appliance. The electrical installation, includ-

ing minimum supply wire size, must comply with the 

National Electric Code ANSI/NFPA 70 (latest revision) 

and local codes and ordinances. A copy of the standard 

may be obtained from:

National Fire Protection Association 

1 Batterymarch Park 

Quincy, Massachusetts 02269-9101

Electrical Specifications

• 

The correct voltage, frequency and amperage must be 

supplied to the appliance from a dedicated, grounded, 

circuit that is protected by a properly sized circuit 

breaker or time-delay fuse. If a time-delay fuse is uti-

lized, fuse both sides of the line (L1 and L2).

• 

The junction box and the remote circuit breaker panel 

or fuse box, must be accessible when the cooktop is in 

place.

Model

Total Connected 

Load*

Dedicated Circuit 

Required

RNCT304

31.0 Amp. 

(7.44 kW)

240 Vac, 60 Hz.  

3 wire** 40 Amp.

RNCT365

45.0 Amp. 

(10.56 kW)

240 Vac, 60 Hz.  

3 wire** 50 Amp.

* These specifications are for reference only. See the prod-

uct data label for exact specifications.
** Two 120 Vac hot (L1 and L2), one ground (all copper).

Model RNCT304

Model RNCT365

All tolerances: ±1/16 (±1.6 mm), unless otherwise stated.

1

Chassis depth is 1/2” wider/deeper at base of glass cooking surface assembly.

2

Cooking surface overhangs top of chassis by 3/4” (1.9 cm) in front, back and on both sides.

Содержание RNCT304













Отзывы: