background image

4

Electrical Specifications

• 

It is the owner’s responsibility to ensure that a licensed 

electrician performs the installation of the electrical sup-

ply for this appliance. The electrical installation, includ-

ing minimum supply wire size, must comply with the 

National Electric Code ANSI/NFPA 70 (latest revision) 

and local codes and ordinances.

A copy of this standard may be obtained from:

• 

The correct voltage, frequency and amperage must be 

supplied to the appliance from a dedicated, grounded, 

single phase circuit that is protected by a properly sized 

circuit breaker or time-delay fuse. If a time-delay fuse is 

utilized, fuse both sides of the line (L1 and L2).

• 

Preheat times and cavity temperature recovery times 

will be increased slightly if operating the unit with less 

than a 240 Vac circuit.

• 

This appliance is provided with electrical wiring in a 

flexible metal conduit.

Product Specifications

Model 

Number

Dedicated Circuit 

Requirements

total Connected 

Load

RO130S

240 Vac 60 Hz,  

4 wire*, 30 Amp.

6.0 kW (25.0 Amp.)

RO130B
ROV130B
RO230S

240 Vac 60 Hz,  

4 wire*, 60 Amp.

12.0 kW (50.0 Amp.)

RO230B
ROV230B

* Two 120 Vac hot (L1 and L2), one neutral, one ground.
The above specifications are for reference only. See the 

appliance data plate (page 3) for exact specifications.

National Fire Protection Association 

1 Batterymarch Park 

Quincy, Massachusetts 02269-9101

Model 

Number

 (A) 

Overall 

Width

(B) Chassis 

Width 

 (C) Overall 

Height

(D) Chassis 

Height

(E) Control 

Panel 

Overlay

RO130S

29 7/8”  

(75.9 cm)

28 3/8”  

(72.1 cm)

27 5/8” (70.2 

cm)

26 5/8” 

(67.6 cm)

1” 

(2.5 cm)

RO130B
ROV130B
RO230S

29 7/8”  

(75.9 cm)

28 3/8”  

(72.1 cm)

49 7/8” 

(126.7 cm)

49” 

(124.5 cm)

7/8”  

(2.2 cm)

RO230B
ROV230B

Product Dimensions

All tolerances: ±1/16 (±1.6 mm), unless otherwise stated.

(F) Utility 

Cutout 

Width

(G) Utility 

Cutout 

Height

 (H) Utility 

Cutout 

Depth

 (J) Control 

Panel 

Depth

 (K) Chassis 

Depth

All Models

6 1/4”  

(15.9 cm)

4 3/4” 

(12.1 cm)

7 3/4” 

(19.7 cm)

1 3/16” 

(3.0 cm)

23 5/8”  

(60.0 cm)

Содержание Renaissance RO130





















Отзывы: