4
Changing the Light Bulbs
The suction cup, part number 62408, supplied with the
IVS, is designed to assist in the removal and replace-
ment of the halogen light bulbs, should they burn out. To
remove a bulb, simply press the suction cup onto the face
of the bulb and unscrew in a counter-clockwise direction
(as you are facing the bulb). To install the new bulb, start
the new bulb in the socket in a clockwise direction by
turning a few times by hand, then attach the suction cup
to the face of the bulb and complete the installation. Keep
the suction cup in a safe place for future maintenance.
For replacement lamps, contact your Dacor parts distribu-
tor and order part number 62351.
CaUTiOn
If commercially available stainless steel cleaners are
used, it is important to read the labels for chlorine
compounds. Chlorine is a corrosive substance. If these
compounds are present, rinse thoroughly and dry with a
soft lint-free cloth. Follow manufacturer’s instructions for
application of polish.
Proper cleaning is necessary to maintain performance
and appearance, while also ensuring safe operation. The
frequency of cleaning should be adjusted according to the
type and amount of cooking. Best results will be achieved
by cleaning soiled components as soon as possible.
The filters must be cleaned regularly. Remove one filter at
a time, grasp the filter handle and gently push back and
pull the front down.
The filters may be cleaned by hand washing in hot water
with a mild detergent solution or by placing them in an
automatic dishwasher. Dry the filters completely before
using them again.
STAINLESS STEEL, BRASS AND CHROME SURFACES
should be cleaned with a solution of mild detergent and
warm water. Rinse and dry with a soft lint-free cloth.
Always wipe stainless steel surfaces with the grain. Never
wipe across the grain. After cleaning, reinstall the filters
carefully.
Care and Cleaning
Содержание IVS1
Страница 2: ...2007 Dacor all rights reserved...
Страница 10: ...8 Notes...