Dacor ERWD30, Инструкция по использованию и уходу

Страница: 9 / 16

7
Care and Cleaning
Drawer Installation
push in on tab
(both sides)
Drawer removal
pull up on
drawer front
push drawer front
down until tab locks
in place
Slide mounting bracket
under clip on slide
Clip on slide
Slide
Removing the Drawer from the
Appliance
allow the drawer to cool before attempting to remove it.
1. pull the drawer out to the fully open position.
2. push in on the locking tab on one side as you pull the
drawer up. See the facing page.
3. When the drawer comes loose from the slide, repeat
the same process on the opposite side.
4. Grip the drawer on both sides and pull it free.
5. for safety, push both drawer slides into the drawer
opening.
Reinstalling The Drawer
1. pull the drawer slides all the way out of the drawer
opening.
2. Gently lower the drawer between the extended slides
until it is suspended by them.
3. Slide the back of the drawer mounting brackets under
the clips on the slides. See the facing page.
4. push one side of the drawer down onto its locking tab,
until the tab locks into place.
5. repeat the same process on the opposite side.
6. Gently open and close the drawer to make sure that it
is properly installed.